✦ LIBER ✦

Production of Nanoparticles in Diffusion Flames – Reactor Design and Scale-up

✍ Scribed by K. Wegner; S. E. Pratsinis

Publisher: John Wiley and Sons
Year: 2003
Tongue: German
Weight: 75 KB
Volume: 75
Category: Article
ISSN: 0009-286X
DOI: 10.1002/cite.200390376

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Design and scale-up of chemical reactors

Design and scale-up of chemical reactors for nanoparticle precipitation

✍ Daniele L. Marchisio; Liliana Rivautella; Antonello A. Barresi 📂 Article 📅 2006 🏛 American Institute of Chemical Engineers 🌐 English ⚖ 270 KB

Morphological evolution of nanoparticles

Morphological evolution of nanoparticles in diffusion flames: Measurements and modeling

✍ Y. Xing; D. E. Rosner; Ü. Ö. Köylü; P. Tandon 📂 Article 📅 1997 🏛 American Institute of Chemical Engineers 🌐 English ⚖ 979 KB

Influence of Burner Scale-up on Characte

Influence of Burner Scale-up on Characteristics of Flame-Synthesized Titania and Silica Nanoparticles

✍ R. Dittmann; J. Richter; A. Vital; D. Piazza; C. Aneziris; T. Graule 📂 Article 📅 2005 🏛 John Wiley and Sons 🌐 English ⚖ 457 KB

ChemInform Abstract: Design and Scale-up

ChemInform Abstract: Design and Scale-up of the Fischer—Tropsch Bubble Column Slurry Reactor

✍ R. Krishna; S. T. Sie 📂 Article 📅 2010 🏛 John Wiley and Sons ⚖ 25 KB 👁 1 views

## Abstract ChemInform is a weekly Abstracting Service, delivering concise information at a glance that was extracted from about 100 leading journals. To access a ChemInform Abstract of an article which was published elsewhere, please select a “Full Text” option. The original article is trackable v

Synthesis of SiO2 and SnO2 particles in

Synthesis of SiO2 and SnO2 particles in diffusion flame reactors

✍ Wenhua Zhu; Sotiris E. Pratsinis 📂 Article 📅 1997 🏛 American Institute of Chemical Engineers 🌐 English ⚖ 703 KB

Scale-Up in the Design of Extrusion Dies

✍ Helmut Potente; Sandra Kramme 📂 Article 📅 2002 🏛 John Wiley and Sons 🌐 English ⚖ 175 KB

## Abstract The similarity theory and the scale‐up procedure developed from it make it possible to convert a technical‐physical process from one scale to another – generally in the upwards direction. In the design of extrusion dies with an annular die gap, the die is broken down into basic geometri