✦ LIBER ✦

Production of high-precision equipment at the F. É. Dzerzhinskii machine-tool plant

✍ Scribed by K. P. Dzidolikas

Publisher: Springer US
Year: 1977
Tongue: English
Weight: 223 KB
Volume: 20
Category: Article
ISSN: 0543-1972
DOI: 10.1007/bf00824834

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Metrological certification of nonstandar

Metrological certification of nonstandard measuring equipment at the Moscow grinding-machine plant

✍ E. N. Kolesnikova 📂 Article 📅 1979 🏛 Springer US 🌐 English ⚖ 183 KB

Organization of the production of large-

Organization of the production of large-size chemical equipment with a high degree of factory finishing at the “Dzerzhinskkhimmash” plant

✍ V. G. Tyugin 📂 Article 📅 1975 🏛 Springer 🌐 English ⚖ 193 KB

Research trends at the Kiev Stend experi

Research trends at the Kiev Stend experimental machine-building plant and All-Russian Scientific-Research Institute of Synthetic Fibres in creation of equipment for production of fibrous nonwovens

✍ B. D. Rysyuk; A. V. Genis 📂 Article 📅 1993 🏛 Springer US 🌐 English ⚖ 698 KB

Production of roulonated (rolled) high-p

Production of roulonated (rolled) high-pressure equipment at the 50th-Anniversary-of-the-USSR Uralkhimmash plant and attempts of further increasing its quality and efficiency

✍ V. M. Makarov 📂 Article 📅 1979 🏛 Springer 🌐 English ⚖ 379 KB

Production of synthesis gas by partial o

Production of synthesis gas by partial oxidation and high-pressure shift conversion. A fifteen-year case history account of process improvements at the BASF ammonia plant at ludwigshafen, West Germany

✍ Balz, Dietrich F. ;Gettert, Hans F. ;Gruendler, K. H. 📂 Article 📅 1983 🏛 Wiley (John Wiley & Sons) 🌐 English ⚖ 467 KB

ALE Simulation of Orthogonal Cutting: a

ALE Simulation of Orthogonal Cutting: a New Approach to Model Heat Transfer Phenomena at the Tool-Chip Interface

✍ E. Ceretti; L. Filice; D. Umbrello; F. Micari 📂 Article 📅 2007 🏛 International Academy for Production Engineering 🌐 English ⚖ 657 KB

This paper presents a new procedure to evaluate the global heat transfer coefficient in orthogonal cutting. The knowledge of the actual heat transfer conditions is a fundamental issue as far as the life, tool wear and tool substitution interval are regarded. More in detail, an Arbitrary Lagrangian-E