✦ LIBER ✦

Production and structure of flame-sprayed coatings based on Ni-Ci-B-Si alloys

✍ Scribed by Yu. S. Borisov; I. N. Gorbatov; V. R. Kalinovskii; V. K. Fedorenko; Z. P. Shurygina; N. N. Kokorina; V. P. Gopienko

Publisher: Springer
Year: 1985
Tongue: English
Weight: 600 KB
Volume: 24
Category: Article
ISSN: 1573-9066
DOI: 10.1007/bf00792162

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Structural characteristics of flame-spra

Structural characteristics of flame-sprayed Fe-Ni-B alloy coatings

✍ Yu. S. Borisov; V. E. Oliker; V. N. Korzhik; Yu. A. Kunitskii; A. D. Krasyuk; S. 📂 Article 📅 1987 🏛 Springer 🌐 English ⚖ 628 KB

Effect of grinding on plain fatigue and

Effect of grinding on plain fatigue and fretting fatigue behaviour of detonation gun sprayed Cu–Ni–In coating on Al–Mg–Si alloy

✍ B. Rajasekaran; S. Ganesh Sundara Raman; S.V. Joshi; G. Sundararajan 📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 846 KB

Uniaxial plain fatigue and fretting fatigue tests were carried out on detonation gun sprayed Cu-Ni-In coating on Al-Mg-Si alloy samples. The samples in three conditions were considered: uncoated, ascoated and ground after coating. Ground coated specimens exhibited superior plain fatigue and fretting

Effect of Ni-to-Fe ratio on structure an

Effect of Ni-to-Fe ratio on structure and properties of Ni–Fe–B–Si–Nb coatings fabricated by laser processing

✍ Ruifeng Li; Zhuguo Li; Jian Huang; Peilei Zhang; Yanyan Zhu 📂 Article 📅 2011 🏛 Elsevier Science 🌐 English ⚖ 867 KB

Spraying powder coatings based on Ni and

Spraying powder coatings based on Ni and Al2O3in the plasma of products of combustion of a hydrocarbon gas

✍ S. V. Petrov; A. G. Saakov 📂 Article 📅 1990 🏛 Springer 🌐 English ⚖ 466 KB

Structure and oxidation behavior of Si–Y

Structure and oxidation behavior of Si–Y co-deposition coatings on an Nb silicide based ultrahigh temperature alloy prepared by pack cementation technique

✍ Xiaodong Tian; Xiping Guo 📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 762 KB

In order to improve the oxidation resistance of silicide coatings on Nb silicide based alloys, Y-modified silicide coatings were prepared by co-depositing Si and Y at 1050, 1150 and 1250 °C for 5-20 h, respectively. It has been found that the coatings prepared by co-depositing Si and Y at 1050 and 1