𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Production and Characterization of Chitosan Fibers and 3-D Fiber Mesh Scaffolds for Tissue Engineering Applications

✍ Scribed by Kadriye Tuzlakoglu; Catarina M. Alves; Joao F. Mano; Rui L. Reis


Publisher
John Wiley and Sons
Year
2004
Tongue
English
Weight
384 KB
Volume
4
Category
Article
ISSN
1616-5187

No coin nor oath required. For personal study only.

✦ Synopsis


Abstract

Summary: This study reports on the production of chitosan fibers and 3‐D fiber meshes for the use as tissue engineering scaffolds. Both structures were produced by means of a wet spinning technique. Maximum strain at break and tensile strength of the developed fibers were found to be 8.5% and 204.9 MPa, respectively. After 14 d of immersion in simulated body fluid (SBF), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), and inductively coupled plasma emission (ICP) spectroscopy analyses showed that a bioactive Ca‐P layer was formed on the surface of the fibers, meaning that they exhibit a bioactive behavior. The samples showed around 120% max. swelling in physiological conditions. The pore sizes of 3‐D chitosan fiber mesh scaffolds were observed to be in the range of 100–500 μm by SEM. The equilibrium‐swelling ratio of the developed scaffolds was found to be around 170% (w/w) in NaCl solution at 37 °C. Besides that, the limit swelling strain was less than 30%, as obtained by mechanical spectroscopy measurements in the same conditions. The viscoelastic properties of the scaffolds were also evaluated by both creep and dynamic mechanical tests. By means of using short‐term MEM extraction test, both types of structures (fibers and scaffolds) were found to be non‐cytotoxic to fibroblasts. Furthermore, osteoblasts directly cultured over chitosan fiber mesh scaffolds presented good morphology and no inhibition of cell proliferation could be observed.

Osteoblast‐like cells proliferating over chitosan based fibers after 7 d of culture.

magnified imageOsteoblast‐like cells proliferating over chitosan based fibers after 7 d of culture.


📜 SIMILAR VOLUMES


Fibers and 3D Mesh Scaffolds from Biodeg
✍ Miroslav P. Pavlov; João F. Mano; Nuno M. Neves; Rui L. Reis 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 English ⚖ 283 KB

## Abstract **Summary:** The aim of this work is the production of fibers from biodegradable polymers to obtain 3D scaffolds for tissue engineering of hard tissues. The scaffolds required for this highly demanding application need to have, as well as the biological and mechanical characteristics, a

Preparation and properties of starch ace
✍ Narendra Reddy; Yiqi Yang 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 207 KB 👁 3 views

## Abstract This article reports the development of fibers from starch acetates that have mechanical properties and water stability better than most polysaccharide‐based biomaterials and protein fibers used in tissue engineering. In this research, starch acetates with three different degrees of sub

Chemical characteristics and cytocompati
✍ Xiaoming Li; Qingling Feng; Wenjie Wang; Fuzhai Cui 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 English ⚖ 384 KB

## Abstract Chitin is a kind of seemly material to match PLLA for a scaffold, which may create an appropriate environment for the regeneration of tissues. In this study, we prepared and evaluated a new nano‐hydroxyapatite/collagen/PLLA (nHACP) scaffold reinforced by chitin fibers for bone‐tissue en

SEM and 3D synchrotron radiation micro-t
✍ Françoise Peyrin; Maddalena Mastrogiacomo; Ranieri Cancedda; Roberta Martinetti 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 581 KB

## Abstract Different biomaterials have been proposed as scaffolds for the delivery of cells and/or biological molecules to repair or regenerate damaged or diseased bone tissues. Particular attention is being given to porous bioceramics that mimic trabecular bone chemistry and structure. Chemical c