✦ LIBER ✦

Process for enrichment of a ferronickel alloy to 90 Pct Ni

✍ Scribed by L. Moussoulos

Book ID: 112828448
Publisher: The Minerals, Metals & Materials Society
Year: 1976
Tongue: English
Weight: 601 KB
Volume: 7
Category: Article
ISSN: 1543-1916
DOI: 10.1007/bf02698596

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

A new face-centered-cubic superlattice s

A new face-centered-cubic superlattice structure in rapidly solidified Cu-4 Wt Pct Ti alloy and its relevance to the ordering process in Ni-Mo and other 1 1/2 0 ordering alloys

✍ U. D. Kulkarni; G. K. Dey; I. S. Batra 📂 Article 📅 2002 🏛 The Minerals, Metals & Materials Society 🌐 English ⚖ 857 KB

Development of cube textured Ni–5at.%W a

Development of cube textured Ni–5at.%W alloy substrates for YBCO coated conductor application using a powder metallurgy process

✍ S.-S. Kim; J.-S. Tak; S.-Y. Bae; J.-K. Chung; I.-S. Ahn; C.-J. Kim; K.-W. Kim; K 📂 Article 📅 2007 🏛 Elsevier Science 🌐 English ⚖ 830 KB

In this paper, Ni-5at.%W alloy substrate for YBCO coated conductor was fabricated by a dry powder metallurgy process including powder compaction, cold isostatic pressing (CIP), cold rolling and annealing for recrystallization. Ni and W powders were ball-milled at this process for various times of 10

Existence of solutions to a phase-field

Existence of solutions to a phase-field model for the isothermal solidification process of a binary alloy

✍ J. Rappaz; J. F. Scheid 📂 Article 📅 2000 🏛 John Wiley and Sons 🌐 English ⚖ 180 KB 👁 2 views

We investigate the well-posedness of a phase-"eld model for the isothermal solidi"cation of a binary alloy due to Warren}Boettinger [12]. Existence of weak solution as well as regularity and uniqueness results are established under Lipschitz and boundedness assumptions for the non-linearities. A max

Use of Taguchi method to develop a robus

Use of Taguchi method to develop a robust design for the magnesium alloy die casting process

✍ Der Ho Wu; Mao Sheng Chang 📂 Article 📅 2004 🏛 Elsevier Science 🌐 English ⚖ 173 KB

This study applies the Taguchi method to optimize the process parameters for the die casting of thin-walled magnesium alloy parts in computer, communications, and consumer electronics (3C) industries. The objectives of the Taguchi method for robust parameter design are to establish the optimal combi

Application of the infinitesimal deforma

Application of the infinitesimal deformation approach to the fcc → bcc martensitic transformation for a Fe-%31Ni alloy

✍ N. Navruz; T. N. Durlu 📂 Article 📅 1999 🏛 Springer 🌐 English ⚖ 39 KB

A study on the electrode characteristics

A study on the electrode characteristics of Zr-based alloy surface-modified with Ti-based alloy by ball-milling process as an anode material for Ni–MH rechargeable batteries

✍ Sang-Min Lee; Seoung-Hoe Kim; Jai-Young Lee 📂 Article 📅 2002 🏛 Elsevier Science 🌐 English ⚖ 947 KB