✦ LIBER ✦

Probabilistic model of the grain-tip distribution at the working surface of a grinding wheel

✍ Scribed by V. A. Nosenko; E. V. Fedotov; A. I. Savin

Book ID: 111509143
Publisher: Allerton Press, Inc.
Year: 2007
Tongue: English
Weight: 188 KB
Volume: 27
Category: Article
ISSN: 1068-798X
DOI: 10.3103/s1068798x07100139

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Failure of diamond grains at the working

Failure of diamond grains at the working surface of grinding wheels

✍ A. V. Popov 📂 Article 📅 2009 🏛 Allerton Press, Inc. 🌐 English ⚖ 107 KB

Attaining optimum relief of the working

Attaining optimum relief of the working surface of the wheel in infeed grinding

✍ A. F. Filin; A. A. Akchurin; B. P. Balabashin 📂 Article 📅 1984 🏛 Springer 🌐 English ⚖ 405 KB

Simulation of the working surface of a g

Simulation of the working surface of a grinding wheel in complex gear cutting

✍ V. M. Makarov; A. S. Kosterin 📂 Article 📅 2008 🏛 Allerton Press, Inc. 🌐 English ⚖ 174 KB

Stress distribution at the surface of a

Stress distribution at the surface of a working in an anisotropic elastic mass

✍ G. N. Mirenkova; É. G. Sosnina 📂 Article 📅 1991 🏛 Springer 🌐 English ⚖ 185 KB

A solution to the distributed parameter

A solution to the distributed parameter model of a continuous grinding mill at steady state

✍ T.S. Mika 📂 Article 📅 1976 🏛 Elsevier Science 🌐 English ⚖ 623 KB

A distributed parameter model of an open-circuit size reduction device at steady state is considered. The model is applicable to tumbling or vibratory mills. Material transport is described in terms of a size-dependent axial convective velocity and a size-dependent axial dispersion coefficient. For

A Model for Predicting the Austenite Gra

A Model for Predicting the Austenite Grain Size at the Surface of Continuously-Cast Slabs

✍ Christian Bernhard; Jürgen Reiter; Hubert Presslinger 📂 Article 📅 2008 🏛 The Minerals, Metals & Materials Society 🌐 English ⚖ 625 KB