## Abstract This paper presents an active control algorithm using the probability density function of structural energy. It is assumed that structural energy under excitation has a Rayleigh probability distribution. This assumption is based on the fact that the Rayleigh distribution satisfies the c
Probabilistic approach for active control of structures: experimental verification
โ Scribed by Jae-Seung Hwang; Kyung-Won Min; Sang-Hyun Lee; Hongjin Kim
- Publisher
- John Wiley and Sons
- Year
- 2005
- Tongue
- English
- Weight
- 493 KB
- Volume
- 34
- Category
- Article
- ISSN
- 0098-8847
- DOI
- 10.1002/eqe.420
No coin nor oath required. For personal study only.
๐ SIMILAR VOLUMES
In experimental studies of structural behaviour, it is often desirable, even necessary, to perform tests on a test structure from its undamaged state, through its damaged states, and finally to failure. The fact that experiments of this type are not often done primarily because of its prohibitive co
A probability-based robust control design methodology is presented that is applied to the 'benchmark system', which is a high-fidelity model of an active-mass-driver laboratory structure. For the controller design, the objective is to maximize the probability that the uncertain structure/controller
## Abstract It is clear that base isolation is a sensible strategic design in attenuating the responses of a structural system induced by ground motions. The design of seismically isolated structures is mainly governed by the Uniform Building Code (UBC) published by the International Conference of