𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Printed wide-slot antenna with high polarization purity for wideband applications

✍ Scribed by Mohammad Naser-Moghadasi; Reza Bayderkhani; Gholamreza Dadashzadeh; Bal S. Virdee

Publisher
John Wiley and Sons
Year
2010
Tongue
English
Weight
783 KB
Volume
52
Category
Article
ISSN
0895-2477

No coin nor oath required. For personal study only.

✦ Synopsis

Abstract

This article describes a novel compact wideband slot antenna comprising of an E‐shaped patch that is excited with a trident‐shaped microstrip feed‐line structure. The antenna design exhibits a very wide operating bandwidth of over 163% with S~11~ < −10 dB in the frequency range 2–19.95 GHz. The antenna's radiation characteristics are stable across the 2–12 GHz band. The proposed antenna exhibits high polarization purity with cross‐polarization level that is well below −50 dB. A comprehensive parametric study was performed on the antenna to fully understand the effects of various antenna parameters that enable optimization of the antenna's performance. This antenna easily fulfills the requirements for ultra‐wideband wireless communication systems as specified by federal communication commission over the designated band 3.1–10.6 GHz. © 2010 Wiley Periodicals, Inc. Microwave Opt Technol Lett 52: 1001–1006, 2010; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.25096

📜 SIMILAR VOLUMES

A printed antenna with constant gain ove
A printed antenna with constant gain over a wide bandwidth for ultra-wideband applications
✍ Y. Ranga; Karu P. Esselle; A.R. Weily; A. K. Verma 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 514 KB

## Abstract A constant‐gain printed circular monopole antenna (PCMA) is presented that operates from 4 to 12 GHz. The gain of the PCMA is enhanced with the use of surface‐wave excited, proximity‐coupled (SW‐PC), conductor‐backed, twin‐slot radiators. A significant improvement in 2 and 3 dB peak gai

Reconfigurable printed-dipole antenna wi
Reconfigurable printed-dipole antenna with harmonic trap for wideband applications
✍ Ali Mirkamali; Peter S. Hall; Mohammad Soleimani 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 English ⚖ 314 KB 👁 1 views

## Abstract This paper presents the concept of using a harmonic trap to design a wideband reconfigurable antenna. The reconfigurable antennas can be used to select one of a number of operating frequency bands. If these bands cover a very wide frequency range, then one of the higher‐frequency bands

A novel monopole antenna with a self-sim
A novel monopole antenna with a self-similar slot for wideband applications
✍ Kun Song; Ying-Zeng Yin; Li Zhang 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 457 KB 👁 1 views

## Abstract In this article, a printed flame‐shaped monopole antenna with a self‐similar slot for wideband application has been presented and investigated. The wideband characteristic is easily achieved by inserting a self‐similar slot in the flame‐shaped radiator. The effect of the slot is investi

The band-notch function for a printed ul
The band-notch function for a printed ultra-wideband monopole antenna with E-shaped slot
✍ Zhen Cui; Yong-Chang Jiao; Li Zhang; Fu-Shun Zhang 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 837 KB

## Abstract In this study, a printed rectangular monopole antenna with a band‐notch function is proposed for ultra‐wideband (UWB) applications. The notched frequency band is achieved by embedding an E‐slot in the rectangular radiation patch. The notched frequency band can be controlled by adjusting

Ultra-wideband slot antenna with band-no
Ultra-wideband slot antenna with band-notch characteristics for wireless USB dongle applications
✍ Deepti Das Krishna; M. Gopikrishna; C. K. Aanandan; P. Mohanan; K. Vasudevan 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 381 KB 👁 1 views

## Abstract A compact ultra‐wideband (UWB) printed slot antenna is described, suitable for integration with the printed circuit board (PCB) of a wireless, universal, serial‐bus dongle. The design comprises of a near‐rectangular slot fed by a coplanar waveguide (CPW) printed on a PCB of size 20 × 30

The design of printed rectangular slot a
The design of printed rectangular slot antenna with a small isosceles triangle slot for Wimax applications
✍ Wen-Shan Chen; Bao-Hung Kao 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 English ⚖ 537 KB

## Abstract Printed rectangular slot antenna fed by a 50‐Ω microstrip line with a small isosceles triangle slot for broadband operation is presented. Both impedance and radiation characteristics of this antenna are studied. Experimental results indicate that a 1:2 VSWR bandwidth of 3.97 GHz is achi