Pressureless sintering of carbon-coated zirconium diboride powders
โ Scribed by Sumin Zhu; William G. Fahrenholtz; Gregory E. Hilmas; Shi C. Zhang
- Publisher
- Elsevier Science
- Year
- 2007
- Tongue
- English
- Weight
- 720 KB
- Volume
- 459
- Category
- Article
- ISSN
- 0921-5093
No coin nor oath required. For personal study only.
๐ SIMILAR VOLUMES
Certain petroleum cokes produce "doublet" (001) X-ray diffraction peaks after they have been heattreated in the 1300" to 1900ยฐC temperature range. These cokes undergo an irreversible volume expansion in this same range. If an additive such as Fe,O, which suppresses the volume expansion is added, the
The major problems associated with zirconium diboride-based ceramics are lack of damage tolerance as structure components, so ZrB 2 /20 vol% SiC based ceramics toughened by 20 vol% short carbon fibers were produced by hot pressing at 2000 ยฐC under 30 MPa for 1 h. SEM results showed that short carbon
A homogeneous and continuous nanostructured SiC coating on the surfaces of T700 and M40 carbon fibres was synthesized by in situ reaction sintering at 1450 ยฐC with the milled Si and C powders, and the coating was characterized. The results show that the slurry is easier to stick to the surface of M4