𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Preparation of porous poly(oxymethylene) membrane with high durability against solvents by a thermally induced phase-separation method

✍ Scribed by Hideto Matsuyama; Masaki Kakemizu; Taisuke Maki; Masaaki Tearamoto; Kenji Mishima; Kiyoshi Matsuyama

Publisher
John Wiley and Sons
Year
2002
Tongue
English
Weight
402 KB
Volume
83
Category
Article
ISSN
0021-8995

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Preparation of a porous structure in a p
Preparation of a porous structure in a poly(4-methyl-1-pentene)/diphenyl ether system with a thermally induced phase-separation method
✍ Qiang Zhang; Youquan Zhang; Dewan Xia; Yun Zhao; Yanqiao Shi; Qingze Jiao 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 374 KB 👁 1 views

## Abstract Poly(4‐methyl‐1‐pentene) was used to prepare porous structures by a thermally induced phase‐separation method. Different porous structures were obtained with poly(4‐methyl‐1‐pentene), which has excellent properties as a polymer, and diphenyl ether as a diluent. The affecting factors, in

Fouling reduction of a poly(ether sulfon
Fouling reduction of a poly(ether sulfone) hollow-fiber membrane with a hydrophilic surfactant prepared via non-solvent-induced phase separation
✍ Nasrul Arahman; Tatsuo Maruyama; Tomohiro Sotani; Hideto Matsuyama 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 95 KB 👁 1 views

## Abstract Membrane fouling is still a crucial problem, especially in applications for water treatment. When fouling takes place on membrane surfaces, it causes flux decline, leading to an increase in production cost due to increased energy demand. The selection of the right membrane material and