✦ LIBER ✦

Preparation of poly(lactic acid) fiber by dry–jet–wet spinning. II. Effect of process parameters on fiber properties

✍ Scribed by Bhuvanesh Gupta; Nilesh Revagade; Nishat Anjum; Björn Atthoff; Jöns Hilborn

Publisher: John Wiley and Sons
Year: 2006
Tongue: English
Weight: 429 KB
Volume: 101
Category: Article
ISSN: 0021-8995
DOI: 10.1002/app.23543

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Studies on dry-jet-wet spun polyurethane

Studies on dry-jet-wet spun polyurethane fibers. II. Effect of polyurethane shore hardness on spinnability and fiber properties

✍ G. V. Raghunath Reddy; B. L. Deopura; Mangala Joshi 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 428 KB

Effect of process parameters on properti

Effect of process parameters on properties of wet-spun poly(L,D-lactide) copolymer multifilament fibers

✍ Marja Rissanen; Arja Puolakka; Terttu Hukka; Ville Ellä; Pertti Nousiainen; Minn 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 198 KB

## Abstract Poly(L,D‐lactide) [P(L,D)LA], LL/D ratio 96/4, and poly(L,DL‐lactide) [P(L,DL)LA], L/DL ratio 70/30, multifilament fibers were prepared by wet‐spinning and the effects of the spin draw ratio and the coagulant on the morphological, thermal, and mechanical properties of the filaments were

Effects of spinning speed and heat treat

Effects of spinning speed and heat treatment on the mechanical properties and biodegradability of poly(lactic acid) fibers

✍ Chung Hee Park; Eun Young Hong; Yun Kyung Kang 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 English ⚖ 437 KB 👁 1 views