✦ LIBER ✦

Preparation of functionalized polystyrene by reactive extrusion and its blend with polyamide 6

✍ Scribed by Won Ho Jo; Chan Dong Park; Moo Sung Lee

Publisher: Elsevier Science
Year: 1996
Tongue: English
Weight: 633 KB
Volume: 37
Category: Article
ISSN: 0032-3861
DOI: 10.1016/0032-3861(96)83723-2

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Functionalization of LDPE by Melt Grafti

Functionalization of LDPE by Melt Grafting with Glycidyl Methacrylate and Reactive Blending with Polyamide-6

✍ Qian Wei; Donatella Chionna; Elena Galoppini; Mariano Pracella 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 331 KB

## Abstract Low‐density polyethylene (LDPE) was functionalized by melt radical grafting with glycidyl methacrylate (GMA) and employed for reactive blending with polyamide‐6 (PA6). The effect of the reaction procedure on the grafting degree of LDPE‐__g__‐GMA samples (0.5–12.5 wt.‐% GMA) was analyzed

In situ compatibilization of polypropyle

In situ compatibilization of polypropylene/polystyrene blend by controlled degradation and reactive extrusion

✍ Rongbo Li; Xiuqin Zhang; Lijuan Zhou; Jinyong Dong; Dujin Wang 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 311 KB 👁 2 views

## Abstract __In situ__ compatibilization of polypropylene (PP) and polystyrene (PS) was achieved by combinative application of tetraethyl thiuram disulfide (TETD) as degradation inhibitor and di‐__tert__‐butyl peroxide as degradation initiator in the process of reactive extrusion. The PP/PS blends

Characterization of polyamide 6 made by

Characterization of polyamide 6 made by reactive extrusion. II. Analysis of microstructure

✍ P. R. Hornsby; J. F. Tung 📂 Article 📅 1994 🏛 John Wiley and Sons 🌐 English ⚖ 612 KB

Compatibilization of polyethylene/polyam

Compatibilization of polyethylene/polyamide 6 blends with functionalized polyethylenes prepared with metallocene catalyst

✍ U. Anttila; K. Hakala; T. Helaja; B. Löfgren; J. Seppälä 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 337 KB 👁 1 views

Metallocene catalyst technology was utilized to prepare functionalized polyethylenes, which were used as compatibilizers in polyethylene/polyamide 6 (40/60) blends. Polymerization of ethylene with 10-undecen-1-ol, 10-undecenoic acid, or N-methyl-10-undecenylamine resulted in ethylene copolymers with

Effect of molecular weight of functional

Effect of molecular weight of functionalized polystyrene on the compatibility of blends of polyamide 6 and polystyrene

✍ Chan Dong Park; Won Ho Jo; Moo Sung Lee 📂 Article 📅 1996 🏛 Elsevier Science 🌐 English ⚖ 918 KB

Reactive Compatibilization of Polyamide

Reactive Compatibilization of Polyamide 6 with Isocyanate Functionalized Ethylene-Propylene Copolymer

✍ Yongtao Ding; Zhirong Xin; Ying Gao; Xiaodong Xu; Jinghua Yin; Giovanna Costa; L 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 217 KB

## Abstract Reactive compatibilization of ethylene‐propylene copolymer functionalized with allyl (3‐isocyanato‐4‐tolyl) carbamate (TAI) isocyanate (EPM‐g‐TAI) and polyamide 6 (PA6) was investigated in this paper. FTIR analysis revealed the evidence of a chemical reaction between the end groups of P