The Al 2 O 3 -Ni-YSZ anode materials were produced from high purity (>99.99%) NiO, Al 2 O 3 (about 10-20 nm) powders and commercial 3 mol% Y 2 O 3 stabilised ZrO 2 (3YSZ, TOSOH
Preparation of Cu–Ni/YSZ solid oxide fuel cell anodes using microwave irradiation
✍ Scribed by Shamiul Islam; Josephine M. Hill
- Publisher
- Elsevier Science
- Year
- 2011
- Tongue
- English
- Weight
- 421 KB
- Volume
- 196
- Category
- Article
- ISSN
- 0378-7753
No coin nor oath required. For personal study only.
📜 SIMILAR VOLUMES
## Abstract A co‐extrusion technique was employed to fabricate a novel dual layer NiO/NiO‐YSZ hollow fiber (HF) precursor which was then co‐sintered at 1,400 °C and reduced at 700 °C to form, respectively, a meshed porous inner Ni current collector and outer Ni‐YSZ anode layers for SOFC application
## Abstract The published literature relating to damage to SOFCs caused by redox cycling of Ni‐based anodes is reviewed. The review covers the kinetics of Ni oxidation and NiO reduction (as single phases and as constituents of composites with yttria‐stabilised zirconia, YSZ), the dimensional change