๐”– Bobbio Scriptorium
โœฆ   LIBER   โœฆ

Preparation of carbon molecular sieves from macadamia nut shells

โœ Scribed by C. Nguyen; D.D. Do


Publisher
Elsevier Science
Year
1995
Tongue
English
Weight
853 KB
Volume
33
Category
Article
ISSN
0008-6223

No coin nor oath required. For personal study only.

โœฆ Synopsis


In this paper, we present a new approach in the preparation of carbon molecular sieves (CMS). Samples of CMS were prepared from macadamia nut shells by a sequence of three stages. First, activated carbon samples were produced by pyrolysis followed by physical activation with carbon dioxide. They were then treated with coke deposition via benzene thermal cracking. It was found that coke deposition in this step occurred mainly at the pore mouths of micropores, leaving most of the pore interior unchanged. The coke deposition process was allowed to proceed until all micropores became inaccessible to nitrogen molecules, resulting in very low BET surface area, contributed mainly by the meso-and macropores.

In the third stage, we subjected these samples to an additional activation step, which was necessary to refine the opening of the pore mouth. The CMS samples prepared by this method have a micropore volume of the order of 0.19 cc/g, compared to 0.24 cc/g of the original base activated carbon. They are capable of separating CS, from iso-C,H,,, the molecular diameters of which are 3.7 and 4.9 A, respectively.


๐Ÿ“œ SIMILAR VOLUMES


Structural parameters and molecular siev
โœ H.P Boehm; H.H Warnecke ๐Ÿ“‚ Article ๐Ÿ“… 1975 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 132 KB

can lead to serious disagreement between the calculated and real L. values if strain is not considered to modify the scattering profiles. ture range studied which differ with respect. to their microstructure as determined by TEM studies and with respect to their micropore spectra, density, inner su

Preparation of carbon molecular sieves b
โœ S.K. Verma; P.L. Walker Jr. ๐Ÿ“‚ Article ๐Ÿ“… 1992 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 846 KB

Modification ofthe pore structure of microporous carbons by depositing carbon from pyrolysis of CJH6 between 973-I I23 K was investigated in regard to development of molecular sieving properties for separation of O2 and Ar. Excellent adsorption kinetics and selectivity for separation of O2 and Ar we

Preparation of carbon molecular sieves b
โœ S.K. Verma; P.L. Walker Jr. ๐Ÿ“‚ Article ๐Ÿ“… 1993 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 479 KB

Exploratory runs have shown it to be possible to produce a sieve for the separation of O1 from Ar by depositing carbon from propylene in or over an activated carbon (AC) previously impregnated with Ni. It is thought that preferential cracking of propylene at the Ni sites within the pores of the AC p