𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Preparation of Buckypaper–Copper Composites and Investigation of their Conductivity and Mechanical Properties

✍ Scribed by Michele T. Byrne; Yenny R. Hernandez; Thomas Conaty; Fiona M. Blighe; Johnathan N. Coleman; Yurii K. Gun'ko

Publisher
John Wiley and Sons
Year
2009
Tongue
English
Weight
321 KB
Volume
10
Category
Article
ISSN
1439-4235

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Preparation of nano-zinc oxide/EPDM comp
Preparation of nano-zinc oxide/EPDM composites with both good thermal conductivity and mechanical properties
✍ Zhenhua Wang; Yonglai Lu; Jun Liu; Zhimin Dang; Liqun Zhang; Weimin Wang 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 496 KB 👁 2 views

## Abstract In this article, nano‐zinc oxide (ZnO) filled ethylene propylene diene monomer (EPDM) composites are prepared, and the mechanical (static and dynamic) properties and thermal conductivity are investigated respectively, which are further compared with the traditional reinforcing fillers,

Preparation and thermal properties of zi
Preparation and thermal properties of zirconium tungstate/copper composites
✍ X. Yan; X. Cheng; G. Xu; C. Wang; S. Sun; R. Riedel 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 179 KB

ZrW 2 O 8 /Cu composites were prepared by the powder metallurgy method. Electroless plating was used to deposit copper on ZrW 2 O 8 powder before sintering. The thermal expansion and thermal conductivity of composites were measured in the temperature range from 25 o C to 200 o C and compared with th

Conducting Composites of Polyurethane Re
Conducting Composites of Polyurethane Resin and Polypyrrole: Solvent-Free Preparation, Electrical, and Mechanical Properties
✍ Hüseyin Deligöz; Bernd Tieke 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 English ⚖ 176 KB

## Abstract **Summary:** Three methods were used for solvent‐free preparation of conducting composites of PUR and PPy. In all cases, PUR was prepared from TDI and hydroxol 15‐W as polyol cross‐linker, whereas PPy was obtained upon oxidative coupling of Py using ferric chloride as oxidant. In method

Preparation, thermal and mechanical prop
Preparation, thermal and mechanical properties of POSS epoxy hybrid composites
✍ Fei Xiao; Yangyang Sun; Yonghao Xiu; C. P. Wong 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 759 KB

## Abstract Polyhedral oligomeric silsesquioxanes (POSS) epoxy hybrid composites have attracted much research interest because of their unique structure, versatile synthetic approaches, and changeable properties through molecular tailoring. Octakis(dimethylsiloxypropylglycidyl ether)silsesquioxane