✦ LIBER ✦

Preparation of 50Ni–45Ti–5Zr powders by high-energy ball milling and hot pressing

✍ Scribed by Julia Marinzeck de Alcântara Abdala; Bruno Bacci Fernandes; Dalcy Roberto dos Santos; Vinícius André Rodrigues Henriques; Carlos de Moura Neto; Alfeu Saraiva Ramos

Book ID: 116606001
Publisher: Elsevier Science
Year: 2010
Tongue: English
Weight: 985 KB
Volume: 495
Category: Article
ISSN: 0925-8388
DOI: 10.1016/j.jallcom.2009.11.137

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Preparation of Ti+Ti6Si2B powders by hig

Preparation of Ti+Ti6Si2B powders by high-energy ball milling and subsequent heat treatment

✍ Alexandro Nakano Silva; Gilbert Silva; Alfeu Saraiva Ramos; André Luís Paschoal; 📂 Article 📅 2006 🏛 Elsevier Science 🌐 English ⚖ 711 KB

Preparation and characterization of Pb(Z

Preparation and characterization of Pb(Zr0.52Ti0.48)O3 ceramics from high-energy ball milling powders

✍ L.B Kong; W Zhu; O.K Tan 📂 Article 📅 2000 🏛 Elsevier Science 🌐 English ⚖ 799 KB

Study of the microstructure of nanocryst

Study of the microstructure of nanocrystalline Al–5 at.% Ti compacts prepared by reactive ball milling and ultra-high-pressure hot pressing

✍ Kyoung Il Moon; Hee Sub Park; Kyung Sub Lee 📂 Article 📅 2001 🏛 Elsevier Science 🌐 English ⚖ 919 KB

Preparation of PMN powders and ceramics

Preparation of PMN powders and ceramics via a high-energy ball milling process

✍ L. B. Kong; J. Ma; W. Zhu; O. K. Tan 📂 Article 📅 2001 🏛 Springer 🌐 English ⚖ 253 KB

Production of nanocrystalline powders by

Production of nanocrystalline powders by high-energy ball milling: model and experiment

✍ Gusev, A I; Kurlov, A S 📂 Article 📅 2008 🏛 Institute of Physics 🌐 English ⚖ 710 KB

Comparative study on the structure and e

Comparative study on the structure and electrochemical hydriding properties of MgTi, Mg0.5Ni0.5Ti and MgTi0.5Ni0.5 alloys prepared by high energy ball milling

✍ Steeve Rousselot; Daniel Guay; Lionel Roué 📂 Article 📅 2011 🏛 Elsevier Science 🌐 English ⚖ 818 KB

MgTi, Mg 0.5 Ni 0.5 Ti and MgTi 0.5 Ni 0.5 alloys doped with 10 wt.% Pd were prepared by high energy ball milling and evaluated as hydrogen storage electrodes for Ni-MH batteries. X-ray diffraction analyses indicated that the Mg 0.5 Ni 0.5 Ti and MgTi 0.5 Ni 0.5 alloys could be monophased or compose