𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Preparation, morphology, and adhesive and mechanical properties of ultrahigh-molecular-weight polyethylene/SiO2 nanocomposite fibers

✍ Scribed by Yi Zhang; Junrong Yu; Chengjun Zhou; Lei Chen; Zuming Hu

Publisher
Society for Plastic Engineers
Year
2009
Tongue
English
Weight
296 KB
Volume
31
Category
Article
ISSN
0272-8397

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Ultrahigh molecular weight polyethylene/
Ultrahigh molecular weight polyethylene/polypropylene/organo-montmorillonite nanocomposites: Phase morphology, rheological, and mechanical properties
✍ Jinggang Gai; Huilin Li πŸ“‚ Article πŸ“… 2007 πŸ› John Wiley and Sons 🌐 English βš– 582 KB

## Abstract Phase morphology, rheological, and mechanical properties of ultrahigh molecular weight polyethylene (UHMWPE)/PP/organo‐montmorillonite nanocomposites were investigated in this work. The results of TEM and XRD indicated that the organo‐montmorillonite PMM prepared with the complex interc

Investigation on the thermal behaviors a
Investigation on the thermal behaviors and mechanical properties of ultrahigh molecular weight polyethylene (UHMW-PE) fibers
✍ Changfa Xiao; Yufeng Zhang; Sulin An; Guangxia Jia πŸ“‚ Article πŸ“… 1996 πŸ› John Wiley and Sons 🌐 English βš– 399 KB πŸ‘ 2 views

Fibers of ultrahigh molecular weight polyethylene (UHMW-PE) were prepared with the gel fiber drawing method, and the solvent and extraction solvent used were a general kerosene and gasoline, respectively. The thermal behaviors and mechanical properties of the fiber were studied using thermal analysi

Mechanical properties of ultrahigh-molec
Mechanical properties of ultrahigh-molecular-weight polyethylene fiber-reinforced PE composites
✍ Toshio Ogawa; Hiroaki Mukai; Satoshi Osawa πŸ“‚ Article πŸ“… 1998 πŸ› John Wiley and Sons 🌐 English βš– 362 KB πŸ‘ 2 views

Three types of high-strength polyethylene (PE) fiber-reinforced composite sheets were made by compression molding at the vicinity of melting point of the fiber. Sheet I was molded from only PE fibers. Sheets II and III were prepared by the compression molding of PE fiber with conventional high-and l