Preparation, characterization, and properties of nano-TiO2/silk fibroin hybrid films by sol–gel processing
✍ Scribed by Feng Xin-Xing; Zhang Li-Li; Chen Jian-Yong; Zhang Hua-Peng
- Publisher
- John Wiley and Sons
- Year
- 2008
- Tongue
- English
- Weight
- 359 KB
- Volume
- 84A
- Category
- Article
- ISSN
- 1549-3296
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
By sol–gel processing, the regenerated nano‐TiO~2~/SF (silk fibroin) hybrid films were synthesized using different ratios of TiO~2~ to SF. The experimental results revealed that the nano‐TiO~2~ particles were well dispersed in the regenerated SF. The diameter of the nano‐TiO~2~ particles processed by sol–gel method was about 80 nm. Through Fourier transform infrared spectroscopy (FTIR), X‐ray diffraction (XRD), X‐ray energy dispersive spectrometer (EDS), Thermogravimetric analysis (TGA), and Derivative thermogravimetry (DTG), the structures and properties of these hybrid films were characterized. The XRD measurement indicated that the crystal structures of the hybrid films were transited from typical Silk I to typical Silk II. However, it was found that excessive increase in the content of nano‐TiO~2~ led to the breakage of the crystal structures of the hybrid films. The FTIR and EDS analysis showed that new bonds were formed between the nano‐TiO~2~ particles and the SF. Through TGA and DTG, it was demonstrated that the heat transition temperature of the hybrid films was also enhanced. © 2007 Wiley Periodicals, Inc. J Biomed Mater Res, 2008
📜 SIMILAR VOLUMES
## Abstract Hybrid organic–inorganic coatings and free‐standing films were prepared and characterized. The hybrids were prepared from [3‐(glycidyloxy)propyl]trimethoxysilane, diethoxy[3‐(glycidyloxy)propyl]methylsilane, poly(oxypropylene)s of different molecular weights end‐capped with primary amin
## Abstract Poly(ε‐caprolactone) (PCL 6, 12, and 24 wt %) and titanium (TiO~2~) organic–inorganic hybrid materials have been synthesized by the sol–gel method from a multicomponent solution containing titanium butoxide, poly(ε‐caprolactone) (PCL), water, and chloroform (CHCl~3~). Sodium ampicillin
Organosoluble polyimide/silica hybrid materials were prepared using the sol-gel process. The organosoluble polyimide was based on pyromellitic anhydride (PMDA) and 4,4Ј-diamino-3,3Ј-dimethyldiphenylmethane (MMDA). The silica particle size in the hybrid is increased from 100 -200 nm for the hybrid co