𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Preparation and properties of phenolic resin laminates. I. Laboratory evaluation

✍ Scribed by J. F. Meier; E. M. Bellott Jr.; P. P. Frank

Publisher
John Wiley and Sons
Year
1977
Tongue
English
Weight
480 KB
Volume
21
Category
Article
ISSN
0021-8995

No coin nor oath required. For personal study only.

✦ Synopsis

Abstract

The preparation and properties of sodium carbonate and sodium hydroxide‐catalyzed phenolic resins polymerized in 1‐liter glass reactors over a broad range of F/P mole ratios are described. Laminates produced from selected sodium carbonate‐catalyzed resins coated on kraft paper are discussed and compared with laminates prepared from standard sodium hydroxide‐catalyzed resins. Several apparent advantages of the sodium carbonate‐catalyzed resin systems over the sodium hydroxide‐catalyzed resins are presented. The superior performance is attributed to the high degree of crosslinking resulting from the high concentration of methylolated phenols present in the sodium carbonate‐catalyzed resin.

📜 SIMILAR VOLUMES

Preparation and properties of polar poly
Preparation and properties of polar polypropylene blends containing phenolic resin
✍ Tae Won Son; Jun Ho Park; Dong Won Lee; Kwang Hyun Park; Kang Koo; Sang Kyoo Lim 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 357 KB 👁 2 views

It is often pointed out that low water absorption and moisture permeability are drawbacks of polypropylene (PP). In this study, blending with an amorphous polymer was used to modify PP. For improving the properties of PP without any property depression, PP was blended with phenolic resin-Novolak typ

Preparation and properties of phenolated
Preparation and properties of phenolated corn bran (CB)/phenol/formaldehyde cocondensed resin
✍ Seung-Hwan Lee; Mariko Yoshioka; Nobuo Shiraishi 📂 Article 📅 2000 🏛 John Wiley and Sons 🌐 English ⚖ 152 KB 👁 1 views

Corn bran (CB) was liquefied in the presence of phenol at high temperature (200°C) under high pressure (Ͼ1 atm) and the obtained liquefied products were reacted with formaldehyde to get phenolated CB/phenol/formaldehyde resins with excellent yields. The properties of the cocondensed resins were exam

Physical properties of oxidative polymer
Physical properties of oxidative polymerized films prepared from polymerized oils, alkyd resins, and phenolic varnishes: Transition by dynamic-mechanical method and line-width measurement (NMR)
✍ L. W. Chen; Ju Kumanotani 📂 Article 📅 1965 🏛 John Wiley and Sons 🌐 English ⚖ 485 KB 👁 1 views

Glass transition temperatures of oxidative polymerized films were measured by the dynamic+mechanical method and by l i e w i d t h measurements (NMR). The correlation was studied in relation to the chemical structure. The films investigated were polymerized linseed oil, alkyd resins, phenolic varnis