New aromatic tetracarboxylic dianhydride, having isopropylidene and bromo-substituted arylene ether structure 3,3Ј,5,5Ј-tetrabromo-2,2-bis[4-(3,4-dicarboxyphenoxy)phenyl]propane dianhydride, was synthesized by the reaction of 4-nitrophthalonitrile with 3,3Ј,5,5Ј-tetrabromobisphenol A, followed by al
Preparation and properties of organo-soluble polyimides based on 4,4′-diamino-3,3-dimethyldiphenylmethane and conventional dianhydrides
✍ Scribed by Qing-Hua Lu; Jie Yin; Hong-Jie Xu; Jian-Ming Zhang; Li-Ming Sun; Zi-Kang Zhu; Zong-Guang Wang
- Publisher
- John Wiley and Sons
- Year
- 1999
- Tongue
- English
- Weight
- 129 KB
- Volume
- 72
- Category
- Article
- ISSN
- 0021-8995
No coin nor oath required. For personal study only.
✦ Synopsis
4,4Ј-Diamino-3,3Ј-dimethyldiphenylmethane was used to prepare polyimides in an attempt to achieve good organo-solubility and light color. Polyimides based on this diamine and three conventional aromatic dianhydrides were prepared by solution polycondensation followed by chemical imidization. They possess good solubility in aprotonic polar organic solvents such as N-methyl 2-pyrrolidone, N,N-dimethyl acetamide, and m-cresol. Polyimide from 4,4Ј-diamino-3,3Ј-dimethyldiphenylmethane and diphenylether-3,3Ј,4,4Ј-tetracarboxylic acid dianhydride is even soluble in common solvents such as tetrahydrofuran and chloroform. Polyimides exhibit high transmittance at wavelengths above 400 nm. The glass transition temperature of polyimide from 4,4Ј-diamino-3,3Ј-dimethyldiphenylmethane and pyromellitic dianhydride is 370°C, while that from 4,4Ј-diamino-3,3Ј-dimethyldiphenylmethane and diphenylether-3,3Ј,4,4Ј-tetracarboxylic acid dianhydride is about 260°C. The initial thermal decomposition temperatures of these polyimides are 520 -540°C.
📜 SIMILAR VOLUMES
Aromatic polyetherimides were synthesized from a fluorine containing aromatic carboxylic acid dianhydride, 2,2-bis [4-(3,4-dicarboxyphenoxy)phenyl]hexafluoropropane dianhydride (6F-BABPA) and five typical aromatic diamines including 1,1-bis(4-aminophenyl)-1-phenyl-2,2,2-trifluoroethane (3F-DAM) by t
Four kinds of 3,3 ,4,4-benzophenone tetracarboxylic dianhydride (BTDA) -pyromelliitic dianhydride (PMDA) alternating polyimide (BTDA-PMDA API) were obtained by reacting 1 mol BTDA with 2 mol diamines to form BTDA chainextended diamines (BTDA CED), followed by the addition of 1 mol PMDA to yield the
To prepare thermally stable and high-performance polymeric films, new solvent-soluble aromatic polyamides with a carbamoyl pendant group, namely poly(4,4Јdiamino-3Ј-carbamoylbenzanilide terephthalamide) (p-PDCBTA) and poly(4,4Ј-diamino-3Ј-carbamoylbenzanilide isophthalamide) (m-PDCBTA), were synthes