✦ LIBER ✦

Preparation and properties of castor oil-based polyurethanes

✍ Scribed by Zoran S. Petrović; Dragica Fajnik

Publisher: John Wiley and Sons
Year: 1984
Tongue: English
Weight: 506 KB
Volume: 29
Category: Article
ISSN: 0021-8995
DOI: 10.1002/app.1984.070290401

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Preparation and properties of castor oil

Preparation and properties of castor oil-based polyurethane/α-zirconium phosphate composite films

✍ Jun Ma; Changhua Liu; Rui Li; Haixia Wu; Lina Zhu; Yajuan Yang 📂 Article 📅 2011 🏛 John Wiley and Sons 🌐 English ⚖ 802 KB

Preparation, morphology, and thermoelect

Preparation, morphology, and thermoelectric property studies of BaTiO3 superfine fiber/castor oil polyurethane-based IPN nanocomposites

✍ Tang Dongyan; Qiang Liangsheng; Jin Zheng; Cai Weimin 📂 Article 📅 2002 🏛 John Wiley and Sons 🌐 English ⚖ 260 KB 👁 2 views

Polyurethanes Based on Castor Oil: Kinet

Polyurethanes Based on Castor Oil: Kinetics, Chemical, Mechanical and Thermal Properties

✍ Elodie Hablot; Dan Zheng; Michel Bouquey; Luc Avérous 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 224 KB

## Abstract Polyurethanes based on vegetable oil were synthesized with castor oil and toluene diisocyanate, isophorone diisocyanate or hexamethylene diisocyanate, using dibutyltin dilaurate as a catalyst. The effects of the nature of the diisocyanate on the evolution of the kinetics, as well as the

Cast Polyurethanes Based on Castor Oil a

Cast Polyurethanes Based on Castor Oil and Fluorescein

✍ Ramesh, S.; Mahesh, G. N.; Subramanian, K. A.; Radhakrishnan, Ganga 📂 Article 📅 1997 🏛 John Wiley and Sons 🌐 English ⚖ 254 KB 👁 1 views

Cast polyurethanes based on castor oil, Ñuorescein and tolylene diisocyanate have been synthesized. The polyurethanes were characterized by Fourier transform infrared spectroscopy. The thermal stabilities of the polymers were determined using a thermogravimetric analyser. From the di †erential scann

Instrumented impact testing of castor-oi

Instrumented impact testing of castor-oil-based polyurethanes

✍ T. M. Liu; V. T. Bui 📂 Article 📅 1995 🏛 John Wiley and Sons 🌐 English ⚖ 550 KB

Instrumented impact testing has been used to study castor-oil-based polyurethanes. The energy-absorbed capacity of these materials in impact is dependent on several factors, such as the type of isocyanate, NCO/OH ratio, and testing temperature. An approximate but simple method for the low-temperatur

Cure kinetic of castor oil-based polyure

Cure kinetic of castor oil-based polyurethane

✍ Andressa Cecília Milanese; Maria Odila Hilário Cioffi; Herman Jacobus Cornelis V 📂 Article 📅 2011 🏛 John Wiley and Sons 🌐 English ⚖ 517 KB