Preparation and characterization of polycarbonates from 2,4,8,10-tetraoxaspiro[5,5]undecane-3-one (DOXTC)-trimethylenecarbonate (TMC) ring-opening polymerizations
✍ Scribed by Xianhai Chen; Stephen P. McCarthy; Richard A. Gross
- Publisher
- John Wiley and Sons
- Year
- 1998
- Tongue
- English
- Weight
- 200 KB
- Volume
- 67
- Category
- Article
- ISSN
- 0021-8995
No coin nor oath required. For personal study only.
✦ Synopsis
The new cyclic carbonate monomer 2,4,8,10-tetraoxaspiro [5,5]undecane-3one (DOXTC) was prepared in ú 80% yield by the reaction of 1,3-dioxane-5,5-dimethanol with ethyl chloroformate in tetrahydrofuran (THF). DOXTC homopolymerization and copolymerizations with trimethylene carbonate (TMC) were carried out using aluminoxanes (methyl and isobutyl) as catalysts. The copolymer yields normally exceeded 90%. Carbon-13 ( 13 C) nuclear magnetic resonance (NMR) at 62.5 MHz resolved copolymer dyad sequences. Comparison of the fraction of dyad sequences determined by 13 C-NMR and calculated assuming a Bernoullian distribution showed that propagation statistics were approximately random for copolymerizations carried out at both 90 and 140ЊC. Studies by differential scanning calorimetry (DSC) showed that the DOXTC homopolymer, as well as the copolymers with high DOXTC content ( F DOXTC to F TMC ¢ 7 : 3), were semicrystalline. The DOXTC homopolymer had a peak melting temperature of 202ЊC, enthalpy of fusion of 75 J/g, and a glass transition temperature of 36ЊC. For copolymers with F DOXTC to F TMC ¢ 9/1, crystallization exotherms were observed both during the second heating, as well as cooling (10ЊC/min) DSC scans. The relationship between the copolymer glass transition and composition was in agreement with that predicted by the Fox equation. Comparison of the wide-angle X-ray scattering (WAXS) patterns of the DOXTC homopolymer with F DOXTC to F TMC of 7 : 3 and 9 : 1 showed that the former sample had more pronounced and better resolved crystalline reflections. These results suggest that the DOXTC homopolymer has well-ordered crystalline domains and high sample crystallinity. By increasing the molar content of 1,3-dioxane side groups in DOXTC-TMC copolymers from 0 to 50%, the water uptake by the corresponding films was increased from 5.1 to 19% (w/w).