𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Preparation and characterization of membrane electrode assembly (MEA) for PEMFC

✍ Scribed by İrem Fırtına; Sıtkı Güner; Ayhan Albostan

Publisher
John Wiley and Sons
Year
2010
Tongue
English
Weight
347 KB
Volume
35
Category
Article
ISSN
0363-907X

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Effect of ionomer content and relative h
Effect of ionomer content and relative humidity on polymer electrolyte membrane fuel cell (PEMFC) performance of membrane-electrode assemblies (MEAs) prepared by decal transfer method
✍ Sunyeol Jeon; Jisun Lee; Gema M. Rios; Hyoung-Juhn Kim; Sang-Yeop Lee; EunAe Cho 📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 768 KB

Membrane-electrode assemblies (MEAs) were fabricated by the decal transfer method with various Nafion ionomer contents (10e40 wt%) and their single cell performance and electrochemical characteristics were examined in atmospheric air at relative humidities of 25e95%. At high humidity (95%), the MEA

Investigation of a Novel Catalyst Coated
Investigation of a Novel Catalyst Coated Membrane Method to Prepare Low-Platinum-Loading Membrane Electrode Assemblies for PEMFCs
✍ X. Leimin; L. Shijun; Y. Lijun; L. Zhenxing 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 307 KB

## Abstract In this work, a novel catalyst coated membrane (CCM) approach–a catalyst‐sprayed membrane under irradiation (CSMUI)–was developed to prepare MEAs for proton exchange membrane fuel cell (PEMFC) application. Catalyst ink was sprayed directly onto the membrane and an infrared light was use