𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Preliminary studies in the processing and characterization of Al2O3/SnO2 laminated composites

✍ Scribed by G. M. Gladysz; M. Schmücker; H. Schneider; K. K. Chawla; D. L. Joslin; M. K. Ferber

Book ID
111535263
Publisher
Springer
Year
1999
Tongue
English
Weight
431 KB
Volume
34
Category
Article
ISSN
0022-2461

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Sintering and characterization of Al2O3-
Sintering and characterization of Al2O3-TiB2 composites
✍ Isao Kimura; Noriyasu Hotta; Yukio Hiraoka; Natsukaze Saito; Yuji Yokota 📂 Article 📅 1989 🏛 Elsevier Science 🌐 English ⚖ 476 KB

## A bstra ct AI203-TiB 2 composites containing 0-50 wt% TiB 2 were prepared by sintering at 1600-1750°C ,for 15-120min in a vacuum. Relative density increased with TiB 2 addition from 97% (no TiB2) to about 99% ( lO-40wt% TiB2) on sintering at 1750°C Jbr 60 min. TiB 2 behaved as a sintering aid t

Improving the mechanical properties of A
Improving the mechanical properties of Al2O3/Ni laminated composites by adding Ni particles in Al2O3 layers
✍ Kai Hui Zuo; Dong Liang Jiang; Qing Ling Lin; Yu-ping Zeng 📂 Article 📅 2007 🏛 Elsevier Science 🌐 English ⚖ 783 KB

The (Al 2 O 3 + Ni) composite, (Al 2 O 3 + Ni)/Ni and Al 2 O 3 /(Al 2 O 3 + Ni)/Ni laminated materials were prepared by aqueous tape casting and hot pressing. Results indicated that the (Al 2 O 3 + Ni) composite had higher strength and fracture toughness than those of pure Al 2 O 3 . The fracture to