𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Preliminary experimental study of single screw expander prototype

✍ Scribed by Wei Wang; Yu-ting Wu; Chong-fang Ma; Lin-ding Liu; Jian Yu

Book ID
113463300
Publisher
Elsevier Science
Year
2011
Tongue
English
Weight
607 KB
Volume
31
Category
Article
ISSN
1359-4311

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

An experimental study on plasticating si
An experimental study on plasticating single-screw extrusion
✍ Chang Dae Han; Kee Yoon Lee; Norton C. Wheeler πŸ“‚ Article πŸ“… 1990 πŸ› Society for Plastic Engineers 🌐 English βš– 947 KB

## Abstract An experimental study was conducted with a plasticating single‐screw extruder, which had the following screw dimensions: (a) the diameter (D) of 6.35 cm; (b) the total extruder length of 24 D; (c) the length of the feed section of 3 D; (d) the length of the tapered section of 4 D; and (

An experimental study of single-screw ex
An experimental study of single-screw extrusion of HDPE–wood composites
✍ Karen Xiao; Costas Tzoganakis πŸ“‚ Article πŸ“… 2010 πŸ› John Wiley and Sons 🌐 English βš– 800 KB

## Abstract Single‐screw extrusion experiments were carried out to study the extrusion characteristics of HDPE–wood composites. Three screw geometries (A, B, and C) were used, and the effects of screw speed on output, melting, and pressure profile were studied. Screw A had a much higher compression

Preliminary study of rapid prototype med
Preliminary study of rapid prototype medical models
✍ Sanghera, Bal; Naique, Satyajit; Papaharilaou, Yannis; Amis, Andrew πŸ“‚ Article πŸ“… 2001 πŸ› Emerald Group Publishing Limited 🌐 English βš– 787 KB