✦ LIBER ✦

Prediction of the behaviour of biomass ash in fluidized bed combustors and gasifiers

Publisher: Elsevier Science
Year: 2001
Weight: 182 KB
Volume: 42
Category: Article
ISSN: 0140-6701
DOI: 10.1016/s0140-6701(01)80428-8

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Predicting the ash behaviour of differen

Predicting the ash behaviour of different fuels in fluidized bed combustion

✍ B. Skrifvars 📂 Article 📅 2002 🏛 Elsevier Science ⚖ 387 KB

## 02/01934 Comparison of the loss-on-ignition and thermogravimetric analysis techniques in measuring unburned carbon in coal fly ash Fan, M. and Brown, R

Investigation of ash deposition in a pil

Investigation of ash deposition in a pilot-scale fluidized bed combustor co-firing biomass with lignite

✍ Zuhal Gogebakan; Yusuf Gogebakan; Nevin Selçuk; Ekrem Selçuk 📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 185 KB

Control methods for remediation of ash-r

Control methods for remediation of ash-related problems in fluidized-bed combustors

📂 Article 📅 2001 🏛 Elsevier Science ⚖ 179 KB

Process heating, power and incineration (energy applications in industry) ## 00100506 Bubble tower

Simulation of emission performance and c

Simulation of emission performance and combustion efficiency in biomass fired circulating fluidized bed combustors

✍ Afsin Gungor 📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 282 KB

Prediction of temperature and compositio

Prediction of temperature and composition in a jetting fluidized bed coal gasifier

✍ Jicheng Bi; Toshinori Kojima 📂 Article 📅 1996 🏛 Elsevier Science 🌐 English ⚖ 531 KB

A steady-state numerical simulation model, which takes account of hydrodynamics, mass transfer, heat transfer and reactions, was proposed for the grid zone of a jetting fluidized bed coal gasifier with a conical distributor. Temperatures of theparticle and gas in the jet, compositions in the jet and

00/02512 Recycling of fly ashes from flu

00/02512 Recycling of fly ashes from fluidized-bed incinerators and the furnace bottom residues from fluidized-bed gasifiers

📂 Article 📅 2000 🏛 Elsevier Science ⚖ 418 KB

## related to fuels The manufacturing of high strength carbonaceous materials is discussed. The process involves the fillers and binders being kneaded with heating, mixed with coal tar, kneaded again with heating, crushed, formed, fired and then graphitized. Non-cracking materials can be manufactur