## 2-Mercapto-N-2naphthylacetamide (thionalide) loaded on glass beads with the aid of collodion is used for preconcentration of microgram levels of antimony(II1) from aqueous solution. Antimony is quantitatively retained on the loaded beads from 0.4-0.8 mol 1-l hydrochloric acid solutions; equilib
Preconcentration of palladium(II) from water with thionalide loaded on silica gel
β Scribed by Kikuo Terada; Ken Matsumoto; Yutaka Taniguchi
- Publisher
- Elsevier Science
- Year
- 1983
- Tongue
- English
- Weight
- 382 KB
- Volume
- 147
- Category
- Article
- ISSN
- 0003-2670
No coin nor oath required. For personal study only.
β¦ Synopsis
2-Mercapto-iV2naphthylacetamide (thionalide) on silica gel IS used for rapid preconcentration of pg 1.' levels of palladium(I1) from aqueous solution, followed by atomic absorption spectrometric measurement. In batch experiments, palladium was quantitatively retained on the gel from solutions 5 M in acid to pH 8; equilibrium was achieved within 10 s. The chelating capacity of the gel was 7.5 pmol Pd g-i at pH < 4. The effect of flow rate on retention was studied Palladium retained on the column was completely eluted with 20 ml of 0.2 M thiourea in 0.1 M hydrochloric acid. The palladium concentration in sea water is shown to be < 0.03 bg 1-l.
π SIMILAR VOLUMES
Solid phase extraction using sodium diethyldithiocarbamate (DDC) loaded on silica gel has been used for preconcentration of trace amounts of copper from commercial mineral waters prior to its determination by flame atomic absorption spectrometry. The sorption and releasing of copper have been studie
Sorption properties of silica gel 60 loaded with fungi cells characterized as Aspergillus niger were evaluated for trace enrichment of Cr(III), Cu(II), Zn(II), and Cd(II) from various water samples prior to the description of flame atomic absorption spectrometric analysis. The proposed SPE method is