## Abstract Two basic phenomenological models for deflagration propagation in dust clouds are discussed as the basis for interpreting explosion suppression results. The first model is based on oxygen diffusion to fuel dust particles as the controlling step in explosion propagation through a dust cl
Practical aspects of dust deflagration testing
โ Scribed by L.G. Britton; S. Chippett
- Publisher
- Elsevier Science
- Year
- 1989
- Tongue
- English
- Weight
- 1014 KB
- Volume
- 2
- Category
- Article
- ISSN
- 0950-4230
No coin nor oath required. For personal study only.
โฆ Synopsis
A test procedure is outlined for determination of dust Kn values. The effects of test variables and sample variables are described. The results are discussed in relation to vent relief design via the nomograph method, which is based on the assumption that dusts of equal KS require equal areas of vent relief. It is shown that applicable Kti values can only be measured if 'standard' dust samples are available to calibrate the test equipment; the standard deviations should be considered when applying the data. The accuracy of the 'cubic law' is discussed for dusts and gases. Turbulent K, values for methane and propane are reported under the conditions of turbulence used for 'standardized' dust testing. The effect of accumulation of fines or additives in plant equipment is discussed in relation to ease of dust ignition.
๐ SIMILAR VOLUMES
## Abstract Dust layers on the bottom of mine tunnels, on factory floors, or on the floors of grain elevator passages are the most frequent cause of highly destructive dust explosions. Typically, such layered dust explosions involve a high velocity, accelerating, turbulent flame which is fed by the