By-product fly ash from coal combustion influences the properties of cement pastes significantly.A study has been carried out to contribute to understanding the behavior and function of fly ash and other substituents in cement pastes. Comparisons are made with the properties of pastes of as-recelved
Pozzolanic and cementitious reactions of fly ash in blended cement pastes
β Scribed by Bryan K. Marsh; Robert L. Day
- Publisher
- Elsevier Science
- Year
- 1988
- Tongue
- English
- Weight
- 467 KB
- Volume
- 18
- Category
- Article
- ISSN
- 0008-8846
No coin nor oath required. For personal study only.
β¦ Synopsis
Results of thermogravimetric tests on hardened cement pastes containing fly ash are reported. Ashes derived from subbituminous and lignite coal were used at replacement levels of 30~c and 50~ by weight. Thermal analysis was performed on samples which were water cured for various ages from 3 days to one year.
An analytical technique was used to split the non-evaporable water content of cement pastes into two components: water held by calcium hydroxide, and water held in other reaction products. The technique is used to identify and monitor the progress of reaction of the different types of fly ash.
There are distinct differences in the manner in which the various ash/cement pastes hydrate. The subbhuminous ash relies more upon the "pozzolanic reaction" between calcium silicate and calcium hydroxide to provide the strengthgiving hydration product. Conversely, the lignite ash produces a substantial amount of hydrate by direct reaction between compounds of the ash and water. At early and intermediate ages the hydrate produced from the reaction of fly ash may combine substantially more water per unit weight than the hydrates normally produced through the reaction of cement.
π SIMILAR VOLUMES
The Two Goal Approach was applied to the maximization of fly ash quantity (i.e. minimization of energy consumption) in producing cement of acceptable mechanical characteristics.Mathematical model of the optimization problem consists of two objective functions; a requirement concerning ash quantity a
This paper considers the sulfate corrosion of Portland cement-pure and blended with 30 wt% of fly ash. As raw materials, three kinds of Portland cements, with different content of GA (5.45-l 1.84 wt%), were applied. Fly ash was added so as to decrease the GA content (to 3.82-8.29 v&Oh). The test sam
## Abstract The enhancement in the workability of Portland cement concrete when coal fly ashes are added to the mix is wellβknown. This behaviour has been attributed to the spherical shape and the smooth surface of the fly ash particles. On the other hand, when other combustion residues with pozzol
The diffusion of chloride ions in neat cement pastes and mortars made with and without a limestone filler was investigated. In order to study the effect of the limestone filler, all mixtures were prepared at a fixed water/cement ratio (055). Test results indicate that the addition of a limestone fil