✦ LIBER ✦

Possibilities of using doppler radar data to wind measurement in a planetary boundary layer

✍ Scribed by J Szturc; A Jurczyk; K Ośródka

Book ID: 114402373
Publisher: Elsevier Science
Year: 2000
Tongue: English
Weight: 694 KB
Volume: 25
Category: Article
ISSN: 1464-1909
DOI: 10.1016/s1464-1909(00)00162-3

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Application of boundary layer wind-profi

Application of boundary layer wind-profiling radar data to a Springtime Snowstorm Analysis in Urumqi

✍ Wang Minzhong; Wei Wenshou; He Qing; Yang Qing; Zhao Yong; Li Hongjun; Huo Wen 📂 Article 📅 2011 🏛 John Wiley and Sons 🌐 English ⚖ 565 KB

## Abstract The Urumqi Institute of Desert Meteorology under the China Meteorological Administration (CMA) launched an observational experiment with a boundary layer wind‐profiling radar in Urumqi City in February to March 2010. As described in this paper, wind profiles from the experiment were use

Representativeness of wind measurements

Representativeness of wind measurements with a cw Doppler lidar in the atmospheric boundary layer

✍ Banakh, Victor A. ;Smalikho, Igor N. ;Köpp, Friedrich ;Werner, Christian 📂 Article 📅 1995 🏛 The Optical Society 🌐 English ⚖ 293 KB

[IEEE 2007 IEEE International Geoscience

[IEEE 2007 IEEE International Geoscience and Remote Sensing Symposium - Barcelona, Spain (2007.07.23-2007.07.28)] 2007 IEEE International Geoscience and Remote Sensing Symposium - Numerical simulation of a heterodyne Doppler LIDAR for wind measurement in a turbulent atmospheric boundary layer

✍ Brousmiche, Sebastien; Bricteux, Laurent; Sobieski, Piotr; Macq, Benoit; Winckel 📂 Article 📅 2007 🏛 IEEE ⚖ 489 KB

Boundary-layer-transition measurements o

Boundary-layer-transition measurements on hemispheres of various surface roughnesses in a wind tunnel at mach numbers from 2.48 to 3.55 : Angelo Bandettini and Walter E. Isler. NASA Memorandum 12-25-58A, March 1959. 29 pp., diagrs., photos., tab.

📂 Article 📅 1959 🏛 Elsevier Science 🌐 English ⚖ 137 KB

Oxygen interaction of CdS-based gas sens

Oxygen interaction of CdS-based gas sensors with different stoichiometric compositions was studied by X-ray photoelectron spectroscopy (XPS) and thermal-desorption mass spectroscopy observations combined with conductivity measurements. Three different types of film with different atomic ratios of Cd/S were used in the study of oxygen chemisorption in a low-temperature range between 300 and 570 K. Spray pyrolysis was used for the deposition of the films on glass substrates; XPS and energy dispersive spectroscopy of X-ray together with atomic force microscopy and scanning electron microscopy were used for the characterization of the composition and structure of the films. It was possible to distinguish different temperature ranges for the thermal desorption of the different adsorbed oxygen species. A comparison of the data from XPS and mass-spectroscopy observations with conductance measurements allows to conclude that metallic surface atoms are responsible for different interactions of oxygen species with CdS surfaces.

📂 Article 📅 1995 🏛 Elsevier Science 🌐 English ⚖ 379 KB