Porous titanium alloy for fixation of knee prostheses
โ Scribed by Nilles, J. L. ;Karagianes, M. T. ;Wheeler, K. R.
- Publisher
- John Wiley and Sons
- Year
- 1974
- Tongue
- English
- Weight
- 560 KB
- Volume
- 8
- Category
- Article
- ISSN
- 0021-9304
No coin nor oath required. For personal study only.
โฆ Synopsis
Abstract
A porous titanium alloy called void metal composite (VMC) was investigated for use in knee prosthesis fixation. The interfacial ingrowth fixation of VMC intrameduallary, subchondral, and variable density implants in goat femora was evaluated biomechanically and histologically at six weeks and five months. Biomechanical tests were done under static shear and dynamic, cyclic (fatigue) loading conditions. Readily identifiable bone, strong fixation, and excellent biocompatibility were typical. Some subarticular implants appeared to induce normal hyaline cartilage overgrowth.
๐ SIMILAR VOLUMES
A primary concern of total knee replacement (TKR) is aseptic loosening of the tibial component, which may be caused by shielding of mechanical stresses in the bone and may require subsequent revision surgery. A three-dimensional (3D) finite element (FE) model has been developed to study bone and int
This study investigated the concept of using plates to attach endoprostheses to bone after segmental resection for bone tumours in an animal model. Titanium alloy plates integrated with the prosthesis and coated with hydroxyapatite were attached to bone by screws. This type of uncemented fixation re
## Abstract The effect of __in vivo__ electrical stimulation on the interfacial strength between porous titanium implants and cortical bone was studied in mongrel dogs. The interfacial shear strength of the stimulated implants was consistently greater than that of controls. No difference could be o