## Abstract The sulfonated poly(ether ether ketone) (SPEEK) / polytetrafluoroethylene (PTFE) composite membranes were produced to aid the swelling properties. The PTFE porous films were used as reinforcing material for the SPEEK/PTFE composite membranes. Scanning electron micrographs showed that SP
Polymer nanocomposite membranes based on sulfonated poly(ether ether ketone) and trisilanol phenyl POSS for fuel cell applications
✍ Scribed by Pooja Chhabra; Veena Choudhary
- Publisher
- John Wiley and Sons
- Year
- 2010
- Tongue
- English
- Weight
- 1016 KB
- Volume
- 118
- Category
- Article
- ISSN
- 0021-8995
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
Polymer nanocomposite membranes based on sulfonated poly(ether ether ketone) (SPEEK) (degree of sulfonation 60%) containing varying amounts of open cage trisilanol phenyl polyhedral oligomeric silsesquioxane (POSS) ranging from 0.5 to 5 phr (parts per hundred parts of the polymer resin) were prepared and characterized. The composite membranes were characterized by water uptake, proton conductivity, methanol permeability, X‐ray diffraction (XRD), scanning electron microscopy (SEM), and thermogravimetric analysis (TGA). The presence of nanofillers in the composite films was confirmed by XRD and SEM‐EDX. The domain size of POSS (for 0.5 phr sample) as determined by SEM was in the range of 50–100 nm. Thermal stability of SPEEK remained unaffected by the addition of varying amounts of POSS. Equilibrium water uptake of all the composite membranes (maximum 42%) was higher than that of pure SPEEK membrane (23%) at 80°C. Proton conductivity of SPEEK as measured by two probe method increased upon incorporation of POSS and maximum value was obtained when the POSS content was 2 phr (w/w), that is, 4.5 mS/cm, which was higher when compared with SPEEK (1.5 mS/cm) and Nafion (3.4 mS/cm) at 90°C. Methanol permeability of composite membranes was lower than that of SPEEK/Nafion membrane. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010
📜 SIMILAR VOLUMES
## Abstract **Summary:** Novel poly(aryl ether sulfone) copolymers containing 2,5‐biphenylpyridine and tetramethyl biphenyl moieties were synthesized by polycondensation of 4‐fluorophenyl sulfone with 2,5‐(4′,4″ dihydroxy biphenyl)pyridine and tetramethyl biphenyl diol. Copolymers with different mo
Novel multiblock poly(arylene ether sulfone)s were prepared by a two-pot method from a phenoxide-end-capped fully disulfonated poly(arylene ether sulfone) oligomer and a fluoride-end-capped nonsulfonated poly(arylene ether sulfone) oligomer with block length of 10 as the hydrophilic and hydrophobic
## Abstract Novel bisphenol A‐based sulfonated poly(arylene ether sulfone) (bi A‐SPAES) copolymers were successfully synthesized via direct copolymerization of disodium 3,3′‐disulfonate‐4,4′‐dichlorodiphenylsulfone, 4,4′‐dichlorodiphenylsulfone, and bisphenol A. The copolymer structure was confirme