PM—Power and Machinery: Seed Loss when Cutting a Standing Crop of Oilseed Rape with Two Types of Combine Harvester Header
✍ Scribed by R.N. Hobson; D.M. Bruce
- Publisher
- Elsevier Science
- Year
- 2002
- Tongue
- English
- Weight
- 144 KB
- Volume
- 81
- Category
- Article
- ISSN
- 1537-5110
No coin nor oath required. For personal study only.
✦ Synopsis
Oilseed rape has the potential to expand as an industrial crop. However, as oilseed rape matures, seed loss occurs by dehiscence of the seed from the pods prior to harvest and also as a result of crop disturbance by machinery during harvest. Seed loss of 600 kg ha, 25% of the recorded yield, is not uncommon. This directly increases the price for industrial users and can also reduce oil purity because volunteer plants in subsequent oilseed rape crops may have a di!erent oil fatty acid pro"le. Oilseed rape plants also persist as weeds in subsequent crops. An experiment was carried out to identify the cause of, and quantify contributions to, seed loss from two di!erent designs of header "tted to the combine harvester; a standard header and a header with a conveyor "tted behind the cutterbar, claimed to assist crop #ow into the auger. Seed loss was measured using trays placed in the ripening crop prior to harvest. Seed shed before harvest, 11 kg ha, was low as a result of the relatively settled weather conditions. There was a signi"cant di!erence between losses from the two types of header. The loss from each side knife was the same, but because of the di!ering header widths, translated into losses of 18)4 and 34)6 kg ha\ for the conveyor-assisted and standard headers, respectively, showing the advantage of using a wider header in reducing this loss. Excluding shedding loss and side knife losses, seed loss from the conveyor-assisted header was 59 kg h\ against 104 kg h\ with the standard header. Loss caused only by the cutterbar of the conveyor-assisted header, 27 kg ha, was less than half that of the standard header cutterbar, showing the e!ectiveness of the combination of forward positioning of the cutterbar and conveyorassistance. At 2001 costs, the conveyor-assisted header would recover its additional purchase price in "ve years if used to harvest 171 ha of oilseed rape per year.