๐”– Bobbio Scriptorium
โœฆ   LIBER   โœฆ

Plate-damping measurements in a single reverberation room

โœ Scribed by Yung-Hsiang Chen; Kuo-Tsai Chen; Yan-Hua Chaing

Publisher
Elsevier Science
Year
1996
Tongue
English
Weight
556 KB
Volume
47
Category
Article
ISSN
0003-682X

No coin nor oath required. For personal study only.

โœฆ Synopsis

Laboratory measurements on the damping components of a plate in a single conventional reverberation room by the sound intensity method are presented. A mobile anechoic chamber is placed at the most optimal position inside the reverberation room to meet this purpose. The specimen is placed in the opening of the anechoic chamber. The damping components of the plate can be determined by measurement of the sound pressure levels in the reverberation room and behind the specimen in the anechoic chamber, the reverberation time, the sound absorption coeficient of the specimen, and the velocity of the plate. Comparisons of the experimental results of the present method with other methoa!s show good agreement.

๐Ÿ“œ SIMILAR VOLUMES

Sound absorption in a reverberation room
Sound absorption in a reverberation room: Causes of discrepancies on measurement results
โœ A. Cops; J. Vanhaecht; K. Leppens ๐Ÿ“‚ Article ๐Ÿ“… 1995 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 940 KB

## When measuring the absorption coeficient of acoustic materials in a reverberation room a lot of changing parameters can cause considerable errors in all dtrerent frequency bands of interest. Although the ISOstandard, 'Measurement of the sound absorption in a reverberant room', spectfies the most

Gun-to-noise differences in the dwelling
Gun-to-noise differences in the dwelling rooms reverberation time measurement
โœ M. Mijiฤ‡ ๐Ÿ“‚ Article ๐Ÿ“… 1994 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 144 KB

Differences which occur in the reverberation time measurement by a noise source and by a start gun as impulse source are analyzed in some dwelling rooms smaller than 100 m 2. The statistics of results are also shown.