Plastic stress-strain fields and blunting effects during large deformations

✍ Scribed by H.Q. Liu; G.C. Li

• Publisher: Elsevier Science
• Year: 1992
• Tongue: English
• Weight: 724 KB
• Volume: 42
• Category: Article
• ISSN: 0013-7944
• DOI: 10.1016/0013-7944(92)90056-k

✦ Synopsis

Plastic stress-strain fields of two types of steel specimens loaded to large deformations are studied. Computational results demonstrate that, owing to the fact that the hardening exponent of the material varies as strain enlarges and the blunting of the crack tip, the well known HRR stress field in the plane strain model can only hold for the stage of a small plastic strain. Plastic dilatancy is shown to have substantial effects on strain distributions and blunting. To justify the constitutive equations used for analysis and to check the precision of computations, the load4eflection of a three-point bend beam and the load-elongation of an axisymmetric bar notched by a V-shaped cut were tested and recorded. The computed curves are in good accordance with experimental data.