Plastic part manufacturing : a reference book for manufacturing engineers, managers, and technicians

✍ Scribed by Philip E. Mitchell

Publisher: Society of Manufacturing Engineers
Year: 1996
Tongue: English
Leaves: 694
Series: Tool and manufacturing engineers handbook. Volume 8,
Edition: 4th ed
Category: Library

No coin nor oath required. For personal study only.

✦ Synopsis

This volume focuses on the practical application of processes for manufacturing plastic products. It includes information on design for manufacturability (DFM), material selection, process selection, dies, molds, and tooling, extrusion, injection molding, blow molding, thermoforming, lamination, rotational molding, casting, foam processing, compression and transfer molding, fiber reinforced processing, assembly and fabrication, quality, plant engineering and maintenance, management

📜 SIMILAR VOLUMES

Sustainable Manufacturing and Remanufact

📁 Sustainable Manufacturing and Remanufacturing Management

✍ Weidong Li, Sheng Wang 📂 Library 📅 2019 🏛 Springer International Publishing 🌐 English

<p>This book reports on the latest research and applications in the fields of sustainable manufacturing and remanufacturing, as well as process planning and optimization technologies. It introduces innovative algorithms, methodologies, industrial case studies and applications.<br/>It focuses on two

Manufacturing Engineer's Reference Book

📁 Manufacturing Engineer's Reference Book

✍ D. KOSHAL 📂 Library 📅 1993 🏛 Butterworth-Heinemann 🌐 English

'..as an introduction to all sections no fault can be found in what must be seen as aclassic of its kind.' Eur Ing Ray Yarnell - Engineering World, December 1993'Never before have the wide range of disciplines comprising manufacturing engineering been covered in such detail in one volume.''Extensive

Manufacturing engineer's reference book

📁 Manufacturing engineer's reference book

✍ Dalbir Koshal 📂 Library 📅 1993 🏛 Butterworth-Heinemann, , Elsevier Ltd 🌐 English

Never before have the wide range of disciplines comprising manufacturing engineering been covered in such detail in one volume. Leading experts from all over the world have contributed sections. The coverage represents the most up to date survey of the broad interests of the manufacturing engineer.

Semiconductor manufacturing for technici

📁 Semiconductor manufacturing for technicians

✍ Michael Quirk; Julian Serda 📂 Library 📅 2000 🏛 Prentice Hall 🌐 English

1. Introduction to the Semiconductor Industry. 2. Characteristics of Semiconductor Materials. 3. Device Technologies. 4. Silicon and Wafer Preparation. 5. Chemicals in Semiconductor Fabrication. 6. Contamination Controls in Wafer Fabs. 7. Metrology and Defect Inspection. 8. Gas Control in Pr

Machinery's handbook : a reference book

📁 Machinery's handbook : a reference book for the mechanical engineer, designer, manufacturing engineer, draftsman, toolmaker, and machinist

✍ Erik Oberg; Christopher J McCauley; et al 📂 Library 📅 2008 🏛 Industrial Press 🌐 English

Machinery's handbook: a reference book f

📁 Machinery's handbook: a reference book for the mechanical engineer, designer, manufacturing engineer, draftsman toolmaker and machinist

✍ Franklin D Jones, Henry H Ryffel, Erik Oberg, Christopher J McCauley, Ricardo M 📂 Library 📅 2004 🏛 Industrial Press, Inc. 🌐 English

Celebrating its 90th year, the newest edition of "The Bible" in its field brings together volumes of knowledge, information and data gathered, revised and improved upon from experts throughout the mechanical industries. Extraordinarily comprehensive yet easy to use since it premiered, Machinery’s H