✦ LIBER ✦

Plasma or ion carburizing of several steels

✍ Scribed by N.Y. Pehlivanturk; O.T. Inal; K. Ozbaysal

Publisher: Elsevier Science
Year: 1988
Tongue: English
Weight: 926 KB
Volume: 35
Category: Article
ISSN: 0257-8972
DOI: 10.1016/0257-8972(88)90044-8

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Plasma immersion ion implantation of ste

Plasma immersion ion implantation of steels

✍ G.A. Collins; R. Hutchings; J. Tendys 📂 Article 📅 1991 🏛 Elsevier Science 🌐 English ⚖ 632 KB

Structure and properties of low temperat

Structure and properties of low temperature plasma carburized austenitic stainless steels

✍ R.M. Souza; M. Ignat; C.E. Pinedo; A.P. Tschiptschin 📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 1018 KB

Technological importance of plasma-induc

Technological importance of plasma-induced nitrided and carburized layers on steel

✍ A.M. Staines; T. Bell 📂 Article 📅 1981 🏛 Elsevier Science 🌐 English ⚖ 783 KB

Effect of gas inlet positions on plasma

Effect of gas inlet positions on plasma carburizing of AISI 1020 steel

✍ Shi Li; Rafael R. Manory 📂 Article 📅 1995 🏛 Elsevier Science 🌐 English ⚖ 406 KB

Structure and properties of ion sulphoca

Structure and properties of ion sulphocarbonitrided coatings on several structural steels

✍ Buqian Wang; Xun Luan; Zhenglin Li; Jun Zhang 📂 Article 📅 1988 🏛 Elsevier Science 🌐 English ⚖ 488 KB

Characterization of expanded austenite d

Characterization of expanded austenite developed on AISI 316L stainless steel by plasma carburization

✍ J. García Molleja; L. Nosei; J. Ferrón; E. Bemporad; J. Lesage; D. Chicot; J. Fe 📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 866 KB

Expanded austenite generation through ion carburizing of AISI 316L using two different reactive gas mixtures (Ar 50%, H 2 45%, CH 4 5% and Ar 80%, H 2 15%, CH 4 5%) has been studied. It was found that an ∼ 14 µm surface layer of expanded austenite was developed with 30 min processing for both gas mi