The effects of solute concentration in the range of 0.0013 to 1.051 molality in the feed solution and operating pressure in the range of 100 to 900 psig on solute transport parameter D A M I K ~ in reverse osmosis have been studied for a class of laboratory-made aromatic polyamide membranes and aque
Plasma modification of aromatic polyamide reverse osmosis composite membrane surface
โ Scribed by Shaoyu Wu; Jing Xing; Can Zheng; Guanfan Xu; Guodong Zheng; Jiping Xu
- Publisher
- John Wiley and Sons
- Year
- 1997
- Tongue
- English
- Weight
- 99 KB
- Volume
- 64
- Category
- Article
- ISSN
- 0021-8995
No coin nor oath required. For personal study only.
โฆ Synopsis
The surface of aromatic polyamide reverse osmosis composite membrane was modified by oxygen and argon plasma. The water permeability of oxygen-plasmamodified membrane increases, and the chlorine resistance of argon-plasma-modified membrane increases. The spectra of the attenuated total reflection-Fourier transform infrared and X-ray photoelectron spectroscopy and the contact angle of the water were analyzed to explain the improvement of the two performances of the composite membrane. The carboxyl groups were introduced when modified by oxygen plasma, and cross-linking occurred when modified by argon plasma.
๐ SIMILAR VOLUMES
Surface modification of poly(p-phenylene terephthalamide) (PPTA) film by a remote oxygen plasma treatment has been investigated from a viewpoint of comparison with a direct oxygen plasma treatment. We call the modification procedure in a space far away from the oxygen plasma zone ''the remote oxygen
Reverse-osmosis membrane-grade aromatic polyamides have been synthesized by reacting 3,5-diaminobenzoic acid separately with three different acylchlorides, viz. isophthaloyl chloride, terephthaloyl chloride, and 4,4 -diphenyldicarboxylic acid chloride. Using these polyamides, asymmetric membranes we
The graft copolymerization of glycidyl methacrylate, GMA, onto poly(pphenylene terephthalamide), PPTA, film surfaces was investigated to improve adhesion between the PPTA film and epoxy adhesives. The graft copolymerization of GMA was carried out in two steps; a peroxide formation by a combination o