𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Pitting by Sea Water of austenitic stainless steel

✍ Scribed by J. M. A. van der Horst; President James A. Henley

Publisher
John Wiley and Sons
Year
1974
Tongue
English
Weight
725 KB
Volume
5
Category
Article
ISSN
0933-5137

No coin nor oath required. For personal study only.

✦ Synopsis

Abstract

A sulfuric acid plant was equipped with heat exchangers with Nicrofer 3620 tubing. The cooling medium was sea water. Within 5 weeks after start‐up some of the tubes failed by pitting, showing that it is impossible to use stainless steel as a heat transfer material in sea water unless the molybdenum content is very high.

📜 SIMILAR VOLUMES

Pitting of austenitic stainless steel cl
Pitting of austenitic stainless steel clad metals
✍ Dr. K. N. Krishnan; Prof. K. Prasad Rao 📂 Article 📅 1990 🏛 John Wiley and Sons 🌐 German ⚖ 662 KB

Austenitic stainless steel welds with different ferrite contents (4 and 12FN) were obtained by the Submerged Arc Welding (SAW) strip cladding process, and some clads were remelted by TIG.The welds were post weld heat treated (PWHT) at 600,800,1000"C for 1 h. Pitting potentials were measured in 1 N H

Using pit solution chemistry for evaluat
Using pit solution chemistry for evaluation of metastable pitting stability of austenitic stainless steel
✍ M. H. Moayed; R. C. Newman 📂 Article 📅 2005 🏛 John Wiley and Sons 🌐 German ⚖ 332 KB

## Abstract The stability of a corrosion pit is directly related to the pit solution chemistry. In order to know the stability of a meastable pit, the product of corrosion current density and diffusion depth (pit radius for an open hemisphere pit) is compared to the stability product obtained from

On the Initiation process of pitting cor
On the Initiation process of pitting corrosion on austenitic stainless steel in chloride solutions
✍ A. A. Seys; A. A. van Haute; M. J. Brabers 📂 Article 📅 1974 🏛 John Wiley and Sons 🌐 German ⚖ 939 KB

## Abstract A literature survey has lead to the conclusion that a theory which postulates an increased anodic reactivity on a local site in the passive film is very probable. Experiments have been set up to confirm these suggestions. By means of the electron‐microanalyser, it is shown that CI^−^ion

Pitting corrosion behavior of superferri
Pitting corrosion behavior of superferritic stainless steel in waters containing chloride
✍ G. Moretti; G. Quartarone; A. Tassan; A. Zingales 📂 Article 📅 1993 🏛 John Wiley and Sons 🌐 German ⚖ 674 KB

## Abstract On a cost‐performance basis, superferritic stainless steel (SFSS) grades can now be considered competitive choices for brackish and sea water cooling systems. The pitting corrosion of a SFSS (X2CrNiMoTi 25 3.6 3.5) was tested in a chloride/sulfate solution similar to sea water, as a fun

Determination of upper Boundary pitting
Determination of upper Boundary pitting resistance potential values for austenitic stainless steels under corrosion fatigue
✍ P. Eskelinen; O. Forsén; H. Spähn; S. Yläsaari 📂 Article 📅 1992 🏛 John Wiley and Sons 🌐 German ⚖ 616 KB

## Abstract In this study Mode IV‐corrosion fatigue (CF) characterized by additional superposition of pitting corrosion was investigated. Corrosion fatigue and polarization experiments were carried out on three austenitic (17Cr–13Ni–5Mo–0.15N, 25Ni–20Cr–5Mo–1.5Cu and 18Cr–10Ni–2Mo–0.5Ti) stainless