𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Pipe lap joint with improved sealing slot

Publisher
Elsevier Science
Year
2006
Tongue
English
Weight
169 KB
Volume
2006
Category
Article
ISSN
1350-4789

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Band clamp with embossed gasket for slot
Band clamp with embossed gasket for slotted pipe lap-joints
πŸ“‚ Article πŸ“… 2011 πŸ› Elsevier Science 🌐 English βš– 136 KB

Both the external and internal threads taper at between 0.666 inch per foot and 1.0 inch per foot, and have a stab flank and load flank angles that are equal to about 33ΒΊ.

Sealing characteristics of pipe-joints a
Sealing characteristics of pipe-joints are improved
πŸ“‚ Article πŸ“… 2002 πŸ› Elsevier Science 🌐 English βš– 620 KB

Both solid and hollow shafts are used, and electromotive forces are applied to rotate the shaft. Typically, a rotor is affixed to the outer circumference of the shaft (of either configuration) for this purpose, and the rotor is acted upon by a concentric stator. Either arrangement raises the possibi

Pipe joint with a defined sealing effect
Pipe joint with a defined sealing effect
πŸ“‚ Article πŸ“… 2006 πŸ› Elsevier Science 🌐 English βš– 43 KB

## Isolation damper with air-tight seal Applicant: Daniel Environmental Co, USA This patent describes an isolation damper for use in air delivery trunking. The damper -which may be elliptical -is provided with a seal to provide an air-tight cutoff. It can be used to shut off airflow to prevent cir

Threaded joint for pipes provided with s
Threaded joint for pipes provided with seal
πŸ“‚ Article πŸ“… 2006 πŸ› Elsevier Science 🌐 English βš– 162 KB

A further variation of the threaded joint for oil and gas pipes is described. It creates a metalto-metal seal externally to the female thread. The joint has an extension of the box beyond the seal, which produces an elastic tightening band effect on the seal so that excessive interference on the sea