Physico-chemical, morphological and thermal analysis for the combined pozzolanic activities of minerals additives
✍ Scribed by M. Ashraf; A. Naeem Khan; Qasair Ali; J. Mirza; A. Goyal; A.M. Anwar
- Publisher
- Elsevier Science
- Year
- 2009
- Tongue
- English
- Weight
- 952 KB
- Volume
- 23
- Category
- Article
- ISSN
- 0950-0618
No coin nor oath required. For personal study only.
✦ Synopsis
The research was aimed to evaluate the physico-chemical, morphological and thermal analysis of combined pozzolanic activities of minerals additives. Fly ash and ground granulated blast furnace slag were added, separately and collectively, as mineral replacement in ordinary Portland cement. Tests carried out on specimens cured at different ages were: compressive strength, ultrasonic pulse velocity, X-ray diffraction (XRD) analysis, scanning electron microscopic (SEM) studies, differential thermal analysis (DTA) and thermo-gravimetric analysis (TGA), etc. The results indicated that the compressive strength and ultrasonic pulse velocity development rate of concrete specimens were significantly influenced by the addition of mineral additives. SEM data showed that the fly ash particles were more embedded and surrounded by slag. XRD analysis and DTA/TGA investigation have revealed different reaction kinetics of paste. The peak intensity of calcium hydroxide was significantly retarded by the addition of fly ash and slag, especially in combination, attributed to the dilution effect and calcium hydroxide consumption by pozzolanic reaction.