Physical and mechanical properties of selected amphibolite core samples from the Kola Superdeep Borehole KSDB-3
✍ Scribed by Jiřina Trčková; Roman Živor; Richard Přikryl
- Publisher
- John Wiley and Sons
- Year
- 2002
- Tongue
- English
- Weight
- 479 KB
- Volume
- 14
- Category
- Article
- ISSN
- 0954-4879
No coin nor oath required. For personal study only.
✦ Synopsis
ABSTRACT
Laboratory tests of physical and mechanical properties were performed on amphibolites representing two units from the Kola Superdeep Borehole KSDB‐3 (Russia) − the Proterozoic Karelian Complex (depths of 3043 m, 3530 m and 4389 m) and the Archean Kola–Belomorian Complex (depths of 7951 m, 8942 m and 9904 m). Obtained grain density and bulk density values are nearly identical for all tested samples, but porosities increased slowly with depth. Marked differences in strength properties were found between amphibolite samples from the Karelian Complex and amphibolite samples from the Kola–Belomorian Complex. The uniaxial compressive strength of the samples from the lower part of the borehole is significantly smaller than in samples from the upper part; a similar trend was found for triaxial tests. The values of the deformation modulus, Young's modulus and Poisson's ratio obtained from samples of the Karelian Complex are considerably higher than those from the Kola–Belomorian Complex. Observed mechanical properties are explained by the variable grain‐size distribution and by the spatial arrangement of main rock‐forming minerals. These properties are also influenced by recovery of rocks from great depths.