The effect of including 0.5 wt % talc on the photodegradation behavior of polypropylene (PP) was investigated in injection-molded samples exposed to ultraviolet radiation (UV) in the laboratory for periods of up to 24 weeks. The structure of the talc-nucleated samples was characterized by X-ray diffraction and light microscopy and compared with that of nonnucleated PP, and the information was used to explain the differences in their photodegradation behavior. Measurements of the extent of chemical degradation were made by Fourier transform infrared spectroscopy (FTIR) and gel permeation chromatography (GPC), and they showed that there is no significant effect of a nucleating agent on the kinetics of photooxidation. PP bars containing a nucleating agent showed a larger reduction in mechanical properties with UV exposure and a partial recovery in properties after prolonged exposure was observed with both types of samples. An increase in crystallinity during UV exposure (chemicrystallization) was detected by X-ray diffraction and differential scanning calorimetry (DSC) and the dependence with exposure time was similar in nucleated and nonnucleated samples. DSC was also used to determine the melting behavior and transition temperatures of the specimens during exposure and after recrystallization from the melt.