✦ LIBER ✦

Phase Stability and Oxidation Behavior of an Alumina Scale-Forming NiCrAlY Alloy

✍ Scribed by Michael N. Task; Dong Eung Kim; Zi-Kui Liu; Brian Gleeson; Frederick S. Pettit; Gerald H. Meier

Book ID: 106490262
Publisher: Springer-Verlag
Year: 2010
Tongue: English
Weight: 449 KB
Volume: 74
Category: Article
ISSN: 0030-770X
DOI: 10.1007/s11085-010-9206-6

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Wrinkling behavior of alumina scales for

Wrinkling behavior of alumina scales formed during isothermal oxidation of Fe–Al binary alloys

✍ Z.-G. Yang; P.Y. Hou 📂 Article 📅 2005 🏛 Elsevier Science 🌐 English ⚖ 716 KB

Influence of the mode of introduction of

Influence of the mode of introduction of a reactive element on the high temperature oxidation behavior of an alumina-forming alloy. Part I: Isothermal oxidation tests

✍ S. Chevalier; G. Strehl; H. Buscail; G. Borchardt; J. P. Larpin 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 German ⚖ 359 KB

Different modes of introduction of yttrium have been tested with regard to the influence on the high temperature oxidation behavior of a FeCral alloy. Y 2 O 3 sol-gel coatings, Y 2 O 3 metal-organic chemical vapor deposition (MOCVD) coatings, implanted yttrium ions and yttrium as alloying element (0

Influence of the mode of introduction of

Influence of the mode of introduction of a reactive element on the high temperature oxidation behavior of an alumina-forming alloy. Part II: Cyclic oxidation tests

✍ S. Chevalier; A. P. Dawah Tankeu; H. Buscail; C. Issartel; G. Borchardt; J. P. L 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 German ⚖ 569 KB

## Abstract Several routes of yttrium introduction were applied to test the high temperature oxidation performance of a FeCrAl alloy. Isothermal oxidation tests were described in a previous paper (Part I of this paper in this journal, 2004, 55, 352). Cyclic oxidation tests were performed in air und

Influence of the mode of introduction of

Influence of the mode of introduction of a reactive element on the high temperature oxidation behavior of an alumina-forming alloy. Part III: The use of two stage oxidation experiments and in situ X-ray diffraction to understand the oxidation mechanisms

✍ S. Chevalier; C. Issartel; R. Cueff; H. Buscaif; G. Strehl; G. Borchardt 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 German ⚖ 476 KB

The aim of this work was to investigate several different yttrium introduction routes to improve the high temperature oxidation resistance of a Fe-20Cr-5Al model alloy. Y 2 O 3 sol-gel coatings, Y 2 O 3 metal-organic chemical vapor deposition (MOCVD) coatings, yttrium ion implantation and yttrium as