𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Phase evolution in Al–Ni–(Ti, Nb, Zr) powder blends by mechanical alloying

✍ Scribed by A. Samanta; I. Manna; P.P. Chattopadhyay

Publisher
Elsevier Science
Year
2007
Tongue
English
Weight
660 KB
Volume
464
Category
Article
ISSN
0921-5093

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

High-purity amorphous Zr52.5Cu17.9Ni14.6
High-purity amorphous Zr52.5Cu17.9Ni14.6Al10Ti5 powders via mechanical amorphization of crystalline pre-alloys
✍ Marco E. Siegrist; Michael Siegfried; Jörg F. Löffler 📂 Article 📅 2006 🏛 Elsevier Science 🌐 English ⚖ 407 KB

Fully amorphous Zr 52.5 Cu 17.9 Ni 14.6 Al 10 Ti 5 (Vit 105) powder with very low oxygen contamination was successfully produced from pre-alloyed crystalline material. A yield of over 80% was achieved without the use of a milling agent. The amorphization process was observed by differential scanning

First investigations on twin-rolled Zr59
First investigations on twin-rolled Zr59Cu20Al10Ni8Ti3 bulk amorphous alloy by mechanical spectroscopy
✍ T.A.M. Aboki; M.L. Masse; A. Dezellus; P. Ochin; R. Portier 📂 Article 📅 2004 🏛 Elsevier Science 🌐 English ⚖ 348 KB

Zr 59 Cu 20 Al 10 Ni 8 Ti 3 is one among compositions of ZrCu-based alloys giving bulk amorphous material by cooling from the melt. Twin-roll casting enabling samples suitable for our inverted torsion pendulum has been processed in strips of about 0.60 mm thick. Low temperature IF measurements have