Phase behavior and properties of poly(methyl methacrylate)/poly(vinyl acetate) blends prepared via in situ polymerization

✍ Scribed by Sixun Zheng; Jinyu Huang; Jin Li; Qipeng Guo

• Publisher: John Wiley and Sons
• Year: 1998
• Tongue: English
• Weight: 211 KB
• Volume: 69
• Category: Article
• ISSN: 0021-8995
• DOI: 10.1002/(sici)1097-4628(19980725)69:4<675::aid-app6>3.0.co;2-g

✦ Synopsis

Polymer blends composed of poly ( methyl methacrylate ) ( PMMA ) and poly ( vinyl acetate ) ( PVAc ) were prepared via radical-initiated polymerization of methyl methacrylate ( MMA ) in the presence of PVAc. Differential scanning calorimetry and dynamic mechanical analysis were employed to investigate the miscibility and phase behavior of the blends. The PMMA / PVAc blends of in situ polymerization were found to be phase separated and exhibited a two-phase structure, although some chain transferring reaction between the components occurred. The phase separation resulted from the solvent effect of MMA during the in situ polymerization, which was confirmed by the investigation of phase behavior based on solution cast blending. Solubility analysis of the polymerized blends indicated that some chain transferring reaction between the components occurred during the polymerization. An abrupt increase in gel content from 21.2 to 72.4 wt % was observed when the inclusion of PVAc increased from 30 to 40 wt %, and the gel component consisted of the component polymers as shown by infrared spectroscopy studies. The thermogravimetric analysis study indicated that the inclusion of a small amount of PVAc gives rise to a marked stabilization effect on the thermal stability. The PMMA / PVAc blends exhibited increased notched impact properties with the inclusion of 5 wt % PVAc.