✦ LIBER ✦

Permeability measurement of a circular braided preform for resin transfer molding

✍ Scribed by Yun Kyoung Cho; Young Seok Song; Tae Jin Kang; Kwansoo Chung; Jae Ryoun Youn

Book ID: 105638444
Publisher: The Korean Fiber Society
Year: 2003
Tongue: English
Weight: 271 KB
Volume: 4
Category: Article
ISSN: 1229-9197
DOI: 10.1007/bf02875461

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Estimation of the permeability of fibrou

Estimation of the permeability of fibrous preforms for resin transfer moulding processes

✍ Cai, Zhong 📂 Article 📅 1992 🏛 Elsevier Science ⚖ 875 KB

Transient gas flow technique for inspect

Transient gas flow technique for inspection of fiber preforms in resin transfer molding

✍ Sun K. Kim; Isaac M. Daniel 📂 Article 📅 2005 🏛 Elsevier Science 🌐 English ⚖ 590 KB

In situ measurement and monitoring of wh

In situ measurement and monitoring of whole-field permeability profile of fiber preform for liquid composite molding processes

✍ Li Ding; Chiang Shih; Zhiyong Liang; Chuck Zhang; Ben Wang 📂 Article 📅 2003 🏛 Elsevier Science 🌐 English ⚖ 780 KB

Comments on “A fractal geometry model fo

Comments on “A fractal geometry model for evaluating permeabilities of porous preforms used in liquid composite molding”

✍ B.M. Yu 📂 Article 📅 2001 🏛 Elsevier Science 🌐 English ⚖ 70 KB

Development of a process model for the v

Development of a process model for the vacuum assisted resin transfer molding simulation by the response surface method

✍ Chensong (Jonathan) Dong 📂 Article 📅 2006 🏛 Elsevier Science 🌐 English ⚖ 739 KB

A fast computational model to the simula

A fast computational model to the simulation of non-isothermal mold filling process in resin transfer molding

✍ Aouatif Saad; Adil Echchelh; Mohamed Hattabi; Mohammed El Ganaoui 📂 Article 📅 2011 🏛 Society for Plastic Engineers 🌐 English ⚖ 992 KB

## Abstract The numerical simulation of mass and heat transfer model for the curing stage of the resin transfer molding (RTM) process is known as a useful method to analyze the process before the mold is actually built. Despite the intense interest in the modeling and simulation of this process, th