๐”– Bobbio Scriptorium
โœฆ   LIBER   โœฆ

Performance of direct methanol fuel cells prepared by hot-pressed MEA and catalyst-coated membrane (CCM)

โœ Scribed by Haolin Tang; Shenlong Wang; Mu Pan; San Ping Jiang; Yunzhang Ruan

Book ID
108118947
Publisher
Elsevier Science
Year
2007
Tongue
English
Weight
458 KB
Volume
52
Category
Article
ISSN
0013-4686

No coin nor oath required. For personal study only.

๐Ÿ“œ SIMILAR VOLUMES

Improvement of MEAs for Direct-Methanol
Improvement of MEAs for Direct-Methanol Fuel Cells by Tuned Layer Preparation and Coating Technology
โœ A. Lindermeir; G. Rosenthal; U. Kunz; U. Hoffmann ๐Ÿ“‚ Article ๐Ÿ“… 2004 ๐Ÿ› John Wiley and Sons ๐ŸŒ English โš– 323 KB

## Abstract Large scale production of membrane electrode assemblies (MEAs) for fuel cells requires a fabrication technology, which is not only based on electrochemical phenomena but also takes into account aspects of materials processing and conversion. For the fabrication of MEAs for DMFC a produc

Effect of ionomer content and relative h
Effect of ionomer content and relative humidity on polymer electrolyte membrane fuel cell (PEMFC) performance of membrane-electrode assemblies (MEAs) prepared by decal transfer method
โœ Sunyeol Jeon; Jisun Lee; Gema M. Rios; Hyoung-Juhn Kim; Sang-Yeop Lee; EunAe Cho ๐Ÿ“‚ Article ๐Ÿ“… 2010 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 768 KB

Membrane-electrode assemblies (MEAs) were fabricated by the decal transfer method with various Nafion ionomer contents (10e40 wt%) and their single cell performance and electrochemical characteristics were examined in atmospheric air at relative humidities of 25e95%. At high humidity (95%), the MEA