𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Performance and durability of sulfonated poly(arylene ether sulfone) membrane-based membrane electrode assemblies fabricated by decal method for polymer electrolyte fuel cells

✍ Scribed by Woong-Jeon Ahn; Sung-Dae Yim; Young-Woo Choi; Young-Jun Sohn; Seok-Hee Park; Young-Gi Yoon; Gu-Gon Park; Tae-Hyun Yang; Kwang-Bum Kim

Book ID
113596228
Publisher
Elsevier Science
Year
2011
Tongue
English
Weight
759 KB
Volume
56
Category
Article
ISSN
0013-4686

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Directly copolymerized partially fluorin
Directly copolymerized partially fluorinated disulfonated poly(arylene ether sulfone) random copolymers for PEM fuel cell systems: Synthesis, fabrication and characterization of membranes and membrane–electrode assemblies for fuel cell applications
✍ K.B. Wiles; C.M. de Diego; J. de Abajo; J.E. McGrath 📂 Article 📅 2007 🏛 Elsevier Science 🌐 English ⚖ 588 KB

The effect of partial fluorination on fuel cell behavior at 120 • C and lower (50%) humidity was investigated with hexafluoroisopropylidene bisphenol (Bisphenol AF or 6F) incorporation into a 45 mol% poly(arylene ether sulfone) random copolymer. The novel series of directly disulfonated poly(arylene

Preparation and properties of bisphenol
Preparation and properties of bisphenol A-based sulfonated poly(arylene ether sulfone) proton exchange membranes for direct methanol fuel cell
✍ Ni Zhang; Junjing Li; Xiangyu Wang; Zhi Xia; Huiling Liu 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 351 KB 👁 2 views

## Abstract Novel bisphenol A‐based sulfonated poly(arylene ether sulfone) (bi A‐SPAES) copolymers were successfully synthesized via direct copolymerization of disodium 3,3′‐disulfonate‐4,4′‐dichlorodiphenylsulfone, 4,4′‐dichlorodiphenylsulfone, and bisphenol A. The copolymer structure was confirme

Effect of ionomer content and relative h
Effect of ionomer content and relative humidity on polymer electrolyte membrane fuel cell (PEMFC) performance of membrane-electrode assemblies (MEAs) prepared by decal transfer method
✍ Sunyeol Jeon; Jisun Lee; Gema M. Rios; Hyoung-Juhn Kim; Sang-Yeop Lee; EunAe Cho 📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 768 KB

Membrane-electrode assemblies (MEAs) were fabricated by the decal transfer method with various Nafion ionomer contents (10e40 wt%) and their single cell performance and electrochemical characteristics were examined in atmospheric air at relative humidities of 25e95%. At high humidity (95%), the MEA