In radio communication it is desirable to provide priority functions in order to process traffic with various quality requirements and to deal with multimedia technologies in the future. In the studies until the present, however, the packets were handled on an equal basis and traffic with priority w
Performance analysis of slotted nonpersistent CSMA with an adaptive array and canceling signal
β Scribed by Tsugunao Kobayashi; Akira Sugihara; Kei Enomoto; Iwao Sasase
- Publisher
- John Wiley and Sons
- Year
- 1998
- Tongue
- English
- Weight
- 246 KB
- Volume
- 81
- Category
- Article
- ISSN
- 8756-6621
No coin nor oath required. For personal study only.
β¦ Synopsis
Slotted nonpersistent CSMA with an adaptive array is known to obtain high throughput when a number of terminals transmit data packets to a base station over a common radio channel. However, in this scheme, the terminals cannot begin to use a channel while the interfering packets are transmitted, even if the transmission of the acquired packet is complete. This causes throughput degradation. In this paper, we propose a slotted nonpersistent CSMA with an adaptive array and canceling signals to improve throughput performance. In the proposed model, the base station transmits a canceling signal to the terminals at the end of the transmission period of the acquired packet or at the time a failure occurs. The terminals cancel transmitting packets as soon as the terminals receive the canceling signal. We evaluate the throughput S and the average number of transmissions and schedulings G/S by theoretical analysis and computer simulation. It is shown that the proposed model attains higher S and smaller G/S than the conventional slotted nonpersistent CSMA with an adaptive array.
π SIMILAR VOLUMES
For local wireless communications, the packet reservation multiple access (PRMA) protocol, which combines random access with time division access, is known as an efficient access method to use silence periods of voice traffic. However, the performance of PRMA at the base station is degraded under he
## Abstract In FDM and CDM systems, the peakβtoβaverage power ratio (PAPR) increases as the number of signals to be multiplexed is increased. When a signal with a large PAPR is incident on a power amplifier, either the outβofβband radiation is increased or the power efficiency is degraded. Methods